 |
Basic unit equipped with
24 RJ-45 ports for 10/100Base-TX connections. |
|
Support half duplex and
full duplex modes and auto-negotiation for
all 10/100Base-TX ports. |
|
Two Slots for
100Base-FX. |
|
Supports RJ-45 console
port on the front panel. |
|
| Layer
2 Switching Performance: |
|
6.4Gbps switch fabric |
|
Provides store-and-forward
forwarding scheme |
|
Provides non-blocking switching
performance. Operates at maximum packet filtering
and forwarding rate for 10Mbps: 14880 pps,
100Mbps: 148800 pps. |
|
MDI/MDIX auto sensing on
all 10/100TX ports under Auto-negotiation
mode |
|
Support IEEE 802.3x flow
control and back-press |
|
Provides HOL (Head of Line)
blocking prevention |
|
Support Two slots |
|
Slots types: 100Base-FX
multi-mode, 100Base-FX single-mode |
|
Supports 10K MAC Address
entries |
|
Provides broadcast storming
control |
|
Support multicast: Support
IGMP Snooping |
|
Support Port Mirroring |
|
Provides Link Aggregation
function: Max 7 trunk sets provide, Up to
4 ports per trunks |
|
Standard IEEE 802.1D packet
forwarding function |
|
Support VLAN, IEEE 802.1Q
tag-based VLAN, Up to 256 VLANs, GVRP protocol
for VLAN management |
|
Supports QoS by IEEE 802.1p
2 priority queues control |
|
Supports RMON (4 groups,
including Statistics, History, Alarm and Event) |
|
| Console
Interface: |
|
One male RJ-45 console
interface configured as DTE for operation,
diagnostic, status, & configuration information. |
|
Provides Command Line Interface
(CLI) from the console port using a VT-100
terminal. |
|
Provide WEB interface. |
|
Provides TELNET console
interfaces. |
|
Provides software upgrade
by FTP/TFTP. |
|
| Security:
|
|
Provides user name and
password access control for console, TELNET
and WEB
Management |
|
MAC-based security |
|
IEEE 802.1x transparent
mode |
|
RADIUS Client |
|
|
Home
>
Versa Store
> Switchess
>
VX-S6026C
