Versa Technology

    • The product VX-PI100 IEEE 802.3af Compatible Power Over Ethernet PoE Injector has been added to comparison list.

VX-PI100 IEEE 802.3af Compatible Power Over Ethernet PoE Injector

VX-PI100 IEEE 802.3af Compatible Power Over Ethernet PoE Injector

- Be the first to review this product

Product Overview:


The Versa Technology VX-Pi100 802.3af Cisco Compatible Power Over Ethernet PoE Injector works with any and all access points that are also 802.3af PoE compatible, including all Cisco devices that are now standard 802.3af. The VX-Pi100 Compatible Cisco Power injector is self-contained with both a Cisco Compatible Power Over Ethernet PoE Injector Adapter and a power supply all in one. Have a device compatible with Cisco Injector makes it much easier to deal with when adding to and keeping a clean and efficient cable room. The VX-Pi100 Power Injector also has 100/240VAC support and supplies 48VDC to all units.

Please visit our product Warranty Page here for all Versa Technology's warranty and return policies.

$22.99
  • Buy 20 for $20.99 each and save 9%
  • Buy 50 for $17.99 each and save 22%
$22.99

Availability: In stock

Power over Ethernet and PoE switch products provide high performance, cost effective solutions for combining data and power on a single CatX cable to remote devices such as access points, IP phones, and IP Security Cameras.



PoE injector and PoE hub products along with passive injector/taps, injector/power supplies, high power models, single and four port PoE injectors are also available.This device, compatible with all Cisco Injector standards and Cisco POE products is the perfect networking solution when adding to your existing network.



The Versa Technology VX-Pi100 Compatible Power Over Ethernet PoE Cisco Power Injector Adapter puts Power over pairs 4, 5, 7 and 8 Making it compatible with any Cisco device that is not pre-standard. The Cisco Compatible VX-Pi100 also provides Auto-Recover, Over-Voltage and Short Circuit protection for quality assurance.



This unit can be used as a Compatible Cisco Power Injector. We ship this device with an ** altered Pin Out on the RJ-45 Cable




28.8 Watts

Cispr 22'B', Vcci'B', Fcc'B' Compliance

Light Weight: 145g

Efficiency Over 75%

Over-Voltage Protective Installation

Short-circuit Protective Installation

Protection Type: Auto-Recover

802.3af Standard

Operating Temperature 0°C~40°C

Specifications

Specifications

Output Voltage 48 V / 24W Ripple & Noise 1% Typical
Output Rating 0.5 A Efficiency 83% Typical
Input Voltage AC 90 ~ 264 V Temperature Coefficient 0.05% / °C
Input Frequency 47 ~ 63 Hz Over-Voltage Coefficient 96 V Maximum
Input Current 0.5 A Maximum Operating Temperature -10°C ~ 55°C
Inrush Current 40 A Maximum Storage Temperature -20 ~ 85°C
Line Regulation 2% Maximum Safety Description I / P
Load Regulation ± 5% Dimensions L x W x H 12cm x 5.8cm x 3.8cm



Power over Ethernet (POE) Pinout for Cisco IP Phones and Switches


Standard
Source
Comments
 
Ethernet RJ-45 connector pin number
 
1
2
3
4
5
6
7
8
IEEE 802.3af
using data pairs

RX

DC+

RX

DC+

TX

DC-

spare
spare

TX

DC-

spare
spare

Industry Standard for Embedded POE

(used by Cisco Catalyst Switches)

IEEE 802.3af
using spare pairs
RX
RX
TX
DC+
DC+
TX
DC-
DC-
Industry Standard for Embedded POE
Cisco
(old standard)
RX
RX
TX
DC-
DC-
TX
DC+
DC+
Older Cisco Products (polarity is reversed)
Cisco
(new standard)
RX
RX
TX
DC+
DC+
TX
DC-
DC-
IEEE Compliant



DATA_IN & P + DATA_OUT PIN DEFINITION


Pin
Input SK1
Output SK2
1
Tx (+)
Tx (+)
2
Tx (-)
Tx (-)
3
Rx (+)
Rx (+)
4
N.C
+48 V
5
N.C
+48 V
6
Rx (-)
Rx (-)
7
N.C
GND
8
N.C
GND

Customer Reviews

No reviews yet

Write Your Own Review