Long Distance PoE and Data Extension Solution
Versa Technology VX-PI1000EX is a newly designed and simple device which extends both the reach of Gigabit Ethernet Data and Power over Ethernet over the standard 100m (328 ft.) CAT5e/6 UTP cable to 200m, 300m or longer distance. 

Currently, PoE supported networking devices such as Gigabit PoE IP Cameras, Gigabit PoE Wireless Access Points and Gigabit PoE IP Phones have become the mainstream of network deployment because of the convenience of easy installation regardless of additional power supply. However, limited by the UTP cable specifications, only up to 100 meters (328 ft.) cable could be applied for IP-based and PoE powered devices (PD) installation. Therefore, the VX-PI1000EX is designed as the repeater to forward both Gigabit Ethernet data and PoE power and thus range the PoE powered device installation. By just plug and play but no additional power supply or set up required, one single VX-PI1000EX can increase the PoE range to 200m. By daisy-chaining multiple VX-PI1000EXs, it offers you great flexibility to extend the distance of PoE network to triple, quadruple further in length or more.

Providing PoE and Gigabit Ethernet data extension ability, the VX-PI1000EX is an ideal solution for service providers, campuses and public areas networking application which requires PoE deployment of wireless access points, IP-based surveillance cameras or IP phones in any places. It enables you to centrally manage the power from one location easily, efficiently and cost effectively.

Easy Cabling Installation
The VX-PI1000EX Gigabit PoE Extender is quite easy to be installed by simple plug and play. It is used between a Power Source Equipment (PSE) and the Powered Device (PD); it injects power to the PD without affecting the data transmission performance. The VX-PI1000EX offers a cost effective and quick solution to doubles the standard range of PoE from 100 to 200 meters. There are 2 RJ-45 ports in a compact mini box of Gigabit PoE Extender, of which the IN port functions as "PoE (Data and Power) input" and the other port on the other side functions as "PoE (Data and Power) output". The "PoE OUT" port is also the power injectors which transmit DC Voltage to the Cat5e/6 cable and transfer data and power simultaneously between the PSE and PD.

Long Distance PoE Wireless Access Point
When being used in Wireless LAN implementations, the VX-PI10000EX enables Wireless Access Points to be connected using standard Cat5e/6 cable over 100 meters from the Power Source Equipment (PSE), such as PoE Switch, PoE Injector Hub and single port PoE injector. The VX-PI1000EX is also powered by the incoming PoE on the Ethernet cable and does not require an external power feed. The VX-PI1000EX shall reduce the usage of cables and eliminate the need of dedicated electrical outlets on the wall, ceiling or any unreachable place. It frees the Security IP Cameras and wireless APs deployment from restrictions of power outlet locations.