Versa Technology

VX-PI100 Main View

  • VX-PI100 Main View
  • VX-PI100 Front View
  • VX-PI100 Back

VX-PI100 PoE Injector

- Be the first to review this product

Product Overview:


VX-PI100 802.3af Compatible POE Injector that supplies Power over Ethernet to lan devices including Access Points, VoiP Phones, IP Cameras and HDMI Extenders. The VX-PI100 is one of the best selling and highest quality units today, with over 150,000 sold so far.

Please visit our product Warranty Page here for all Versa Technology's warranty and return policies.

$21.00
$21.00

Availability: In stock

Versa Technology offers the VX-Pi100 802.3af Power over Ethernet (PoE) Injector works with any and all access points that are also 802.3af PoE Compatible. The VX-Pi100 is self-contained with both a Power over Ethernet Poe Injector Adapter and a power supply all in one; this makes it much easier to deal with when keeping a clean cable room. The VX-Pi100 also has 100/240VAC support and supplies 48VDC to all units for power over Ethernet. The VX-PI100 POE Injector supports up to 48 volts and .5 Amps for a total of 24 Watts. This POE Injector can be used with VoiP Phones, IP Cameras, Access Points, Media Devices and many other POE Compliant devices.


The Versa Technology VX-Pi100 Power over Ethernet, Poe Injector Adapter puts Power over pairs 4, 5, 7 and 8. This unit can be used with all Cisco 802.3af POE Compatible devices including Cisco IP Phones and Cisco Wireless Access Points. This Midspan POE Injector also provides Auto-Recover, Over-Voltage and Short Circuit protection.


The VX-PI100x Series Power over Ethernet (PoE) Midspan product category offers a cost effective, fully IEEE 802.3af compatible solution to upgrade existing solutions using PoE.


Midspan Power over Ethernet Injector VX-PI100x Series allows IP telephones, wireless LAN access points, security network cameras and IP terminals to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered.


With PoE, data and power flow smoothly and safely over a single LAN cable with no interference. A PoE injector resides between the Ethernet switch and the data terminals, delivering data, along with power, from switch to powered devices. It is a highly effective means for injecting power into existing LAN cables. VX-PI100x series POE Power Supplies are fully compatible with the IEEE 802.3af PoE definition standard, provide a minimum of 15.4 Watts of power through each port and ensure safe operation of any standard PoE data terminal.


Our most popular power over Ethernet injector networking device now with bulk pricing, order 20 or more and save.






Features





  1. 10/100Mbps

  2. Cat5/Cat6

  3. 24 Watts

  4. Cispr 22'B', Vcci'B', Fcc'B' Compliance

  5. Light Weight: 145g









More Features





  • Efficiency Over 75%

  • Over-Voltage Protective Installation

  • Short-circuit Protective Installation

  • Protection Type: Auto-Recover

  • Operating Temperature -10°C~55°





Specifications

Specifications

Output Voltage 48 V / 24W Ripple & Noise 1% Typical
Output Rating 0.5 A Efficiency 83% Typical
Input Voltage AC 90 ~ 264 V Temperature Coefficient 0.05% / °C
Input Frequency 47 ~ 63 Hz Over-Voltage Coefficient 96 V Maximum
Input Current 0.5 A Maximum Operating Temperature -10°C ~ 55°C
Inrush Current 40 A Maximum Storage Temperature -20 ~ 85°C
Line Regulation 2% Maximum Safety Description I / P
Load Regulation ± 5% Dimensions L x W x H 12cm x 5.8cm x 3.8cm



Power over Ethernet (POE) Pinout for Cisco IP Phones and Switches


Standard
Source
Comments
 
Ethernet RJ-45 connector pin number
 
1
2
3
4
5
6
7
8
IEEE 802.3af
using data pairs

RX

DC+

RX

DC+

TX

DC-

spare
spare

TX

DC-

spare
spare

Industry Standard for Embedded POE

(used by Cisco Catalyst Switches)

IEEE 802.3af
using spare pairs
RX
RX
TX
DC+
DC+
TX
DC-
DC-
Industry Standard for Embedded POE
Cisco
(old standard)
RX
RX
TX
DC-
DC-
TX
DC+
DC+
Older Cisco Products (polarity is reversed)
Cisco
(new standard)
RX
RX
TX
DC+
DC+
TX
DC-
DC-
IEEE Compliant



DATA_IN & P + DATA_OUT PIN DEFINITION


Pin
Input SK1
Output SK2
1
Tx (+)
Tx (+)
2
Tx (-)
Tx (-)
3
Rx (+)
Rx (+)
4
N.C
+48 V
5
N.C
+48 V
6
Rx (-)
Rx (-)
7
N.C
GND
8
N.C
GND

Download product Manuals, Datasheets and Whitepapers


Customer Reviews

No reviews yet

Write Your Own Review