Versa Technology

WGSW-2620HP 24-Port 10/100Mbps + 2 Gigabit TP / SFP Managed 802.3at PoE Switch

WGSW-2620HP 24-Port 10/100Mbps + 2 Gigabit TP / SFP Managed 802.3at PoE Switch

- Be the first to review this product

Have a question? Ask our community

Product Overview:


The WGSW-2620HP, the next generation Managed PoE Switch, features IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combines up to 30 Watts power output and data per port over one CAT 5E/6 Ethernet cable.
$799.00
$799.00

Availability: In stock


High Power PoE for Security and Public Service PoE Applications


The PLANET WGSW-2620HP, the next generation Managed PoE Switch, features IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combines up to 30 Watts power output and data per port over one CAT 5E/6 Ethernet cable. It is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi- channel (802.11a/b/g/n) wireless LAN access points and other network devices by providing double PoE power than conventional 802.3af PoE currently.



Flexible PoE System Management


The PoE in-line power following the IEEE 802.3af and IEEE 802.3at standards makes the WGSW-2620HP able to power on 24 IEEE 802.3af PoE devices or 12 IEEE 802.3at PoE devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. The WGSW-2620HP provides advanced PoE management functions and high reliability. It features System PoE Admin Mode for users to switch PoE system mode between IEEE 802.3af and IEEE 802.3at easily and flexibly. The Temperature Threshold and PoE Usage Threshold also enable more exact reliability control.



Cost-effective Solution with SNMP Monitor for Network Deployment


The cost-effective PoE Managed Switch WGSW-2620HP is released for catering not only to the need of easy Web-Based management but also the centralized SNMP application to monitor the status of Switch and traffic per port. The key features of the WGSW-2620HP are as below:



High Performance Wire-Speed Switching


The WGSW-2620HP offers 24 10/100Mbps Fast Ethernet ports with 2 Gigabit TP/SFP combo ports (Port-25, 26). The two Gigabit TP/SFP combo ports can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Form-Factor Pluggable) interface. The WGSW-2620HP boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 8.8Gbps. Its two built-in GbE uplink ports also offer incredible extensibility, flexibility and connectivity to the Core switch or Servers.



Remote and Centralized Management


Afford the current network to grow and expand, the WGSW-2620HP provides advanced Web and SNMP management interface for efficient network operation. With its built-in Web-Based management, the WGSW-2620HP offers an easy-to-use, platform-independent management and configuration facility. It also supports standard Simple Network Management Protocol (SNMP) and can be monitored via any standard-based management software.

For efficient management, via Web interface the WGSW-2620HP can be programmed for basic switch management functions such as port speed configuration, Port Trunking, VLAN, Port Mirroring, Rapid Spanning Tree and Misc Configuration. Additionally, the firmware includes advanced features such as IGMP snooping, QoS (Quality of Service), broadcast storm and bandwidth control, to enhance bandwidth utilization.



Powerful Security


The WGSW-2620HP offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection mechanisms comprises of Port-Based 802.1X user and device authentication. Moreover, the Switch provides MAC filter and Static MAC to enforce security policies to the edge. The administrators can now construct highly secured corporate networks with considerably less time and effort than before.


Physical Port





  1. 24-Port 10/100Base-TX Fast Ethernet ports with IEEE 802.3af / IEEE 802.3at PoE injector

  2. 2 10/100/1000Base-T TP combo interfaces

  3. 2 1000Base-X mini-GBIC/SFP slots, shared with Port-25 and Port-26

  4. Reset button for system management

  5. 1 RS-232 male DB9 console interface for Switch basic management and setup





Power over Ethernet





  1. Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet End-Span PSE

  2. Up to 24 IEEE 802.3af devices powered

  3. Up to 11 IEEE 802.3at devices powered

  4. Supports PoE Power up to 15.4 Watts / 30 Watts for each PoE ports

  5. Auto detect powered device (PD)

  6. Circuit protection prevent power interference between ports

  7. Remote power feeding up to 100m





PoE Management





  1. IEEE 802.3af and IEEE 802.3at mode switch control

  2. Total PoE power budget control

  3. Per port PoE function enable/disable

  4. PoE Admin-mode control

  5. PoE Port Power feeding priority

  6. Per PoE port power limit

  7. PD classification detection

  8. Over Temperature Protection function

  9. Temperature Threshold Control

  10. PoE Usage Threshold Control








Layer 2 Features





  1. Prevents packet loss Flow Control

  2. -IEEE 802.3x PAUSE Frame flow control for Full-Duplex mode

  3. –Back-Pressure Flow Control in Half-Duplex mode

  4. High performance of Store-and-Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

  5. Broadcast / Multicast / Unicast storm control

  6. 8K MAC address table, automatic source address learning and ageing

  7. Supports VLAN

  8. Supports Link Aggregation

  9. Spanning Tree Protocol

  10. Port Mirroring to monitor the incoming or outgoing traffic on a particular port





Quality of Service





  1. 4 priority queues on all Switch ports

  2. Traffic classification –IEEE 802.1p CoS –IP TOS / DSCP to 802.1p priority mapping –Port-Based priority

  3. Strict priority and Weighted Round Robin (WRR) CoS policies

  4. Supports QoS and In/Out bandwidth control on each port

  5. In/Out rate limit control on each port





Multicast





  1. Supports IGMP Snooping v1 and v2

  2. IGMP Snooping v2 fast leave

  3. Querier mode support






Security





  1. IEEE 802.1x Port-Based network access control protocol

  2. RADIUS users access authentication

  3. L3 / L4 Access Control List (ACL)

  4. Source IP-MAC / Port-Binding

  5. Port Security for Source MAC address entries filtering





Management





  1. Switch Management Interface –Telnet Command Line Interface –Web switch management –SNMP v1, v2c, v3 switch management –SSL switch management

  2. Three user privilege levels control (Admin, Operator, viewer)

  3. DHCP client for IP address assignment

  4. DHCP Option82 and DHCP Relay

  5. Link Layer Discovery Protocol (LLDP) for easy network management

  6. Built-in Trivial File Transfer Protocol (TFTP) client

  7. Firmware upgrade via TFTP or HTTP

  8. Configuration restore / backup via TFTP or HTTP

  9. Event message logging to remote Syslog server

  10. Alarm records extractable in standard CSV format for post processing

  11. Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)

  12. SNMP trap for interface Link Up and Link Down notification

  13. Supports Ping function

  14. Supports Simple Network Protocol (SNTP)




Model WGSW-2620HP 
Hardware Specification
10/100Mbps Copper Ports 24 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
1000Mbps Copper Ports 2 10/100/1000Mbps RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 2 1000Base-SX/LX/BX, shared with Port-25 and Port-26
Switch Architecture Store-and-Forward
Switch Fabric 8.8Gbps / non-blocking
Switch Throughput 6.547Mpps @64Bytes
Address Table 8K entries
Share Data Buffer 512Kbytes
Flash 4MB
DRAM 32MB
Maximum Frame Size 9K Bytes
Flow Control Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LEDPower, PoE Power, FAN Alert
Link / Activity (Green)
PoE In-Use (Amber)
1000 LNK / ACT (Green)
10/100 LNK / ACT (Green)
Dimension ( W x D x H) 440 x 300 x 44.5 mm, 1U height
Weight 4.6kg
Power Requirement 100 - 240VAC, 50 - 60Hz, Auto-sensing
Power ConsumptionSystem
‧110V: 29 Watts / 98BTU
‧220V: 31 Watts / 105BTU
Ethernet Full Loading
‧110V: 34 Watts / 116BTU
‧220V: 35 Watts / 119BTU
PoE Full Loading
‧110V: 360 Watts / 1228BTU
‧220V: 360 Watts / 1228BTU
Reset Button< 5 sec: System reboot
> 10 sec: Factory Default
Power over Ethernet
PoE Standard IEEE 802.3af / IEEE 802.3at Power over Ethernet / PSE
PoE Power Supply Type End-Span
PoE Power OutputPer Port 52V DC, 350mA . Max.15.4 Watts (IEEE 802.3af)
Per Port 52V DC, 590mA. Max. 30 Watts (IEEE 802.3at)
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 360 Watts (Port 1 to port 12: 180 Watts, port 13 to port 24: 180 Watts)
Max. number of Class 1 PD 24
Max. number of Class 2 PD 24
Max. number of Class 3 PD 24
Max. number of Class 0, 4 PD 11
Layer 2 Function
Management InterfaceConsole, Telnet, Web Browser, SSL, SNMPv1, v2c, v3
Port ConfigurationPort disable / enable
Auto-Negotiation
10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Port StatusDisplay each port’s speed duplex mode, link status and Flow control status
Auto negotiation status, trunk status
Port MirroringTX / RX / Both
1 to 1 monitor
Bandwidth ControlIngress / Egress Rate Control
‧ Allow to configure per 128Kbps
VLAN IEEE 802.1Q Tag-Based VLAN, up to 255 VLANs groups, out of 4041 VLAN IDs
Port-Based VLAN
Q-in-Q tunneling
GVRP for VLAN Management, up to 128 dynamic VLAN entries
Private VLAN Edge (PVE / Protected port) with two protected port groups
Link AggregationStatic Port Trunk
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
Supports 13 groups of 8-Port trunk support
QoS4 priority queue
Traffic classification based on:
‧ Port priority
‧ 802.1p priority
‧ DSCP/TOS field in IP Packet
IGMP SnoopingIGMP (v1/v2) Snooping, up to 256 multicast Groups
Access Control ListIP-Based Layer 3 / Layer 4 ACL
Up to 200 ACL rule entries
SNMP MIBsRFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-2665 EtherLike MIB
RFC-1493 Bridge MIB
RFC-2819 RMON MIB (Group 1, 2, 3,9)
RFC-2737 Entity MIB
POWER-ETHERNET-MIB
Standards Conformance
Standards Compliance IEEE 802.3:10Base-T
IEEE 802.3u:100Base-TX
IEEE 802.3z:1000Base-SX/LX
IEEE 802.3ab:1000Base-T
IEEE 802.3x:Flow Control and Back pressure
IEEE 802.3ad:Port trunk with LACP
IEEE 802.1D:Spanning Tree Protocol
IEEE 802.1s:Multiple Spanning Tree Protocol
IEEE 802.1p:Class of Service
IEEE 802.1Q:VLAN Tagging
IEEE 802.1x:Port Authentication Network Control
IEEE 802.3af:Power over Ethernet
IEEE 802.3at:Power over Ethernet (Pre-Standard)
RFC 768:UDP
RFC 793:TFTP
RFC 791:IP
RFC 792:ICMP
RFC 2068:HTTP
RFC 1112:IGMP version 1
RFC 2236:IGMP version 2
Environment
Operating Temperature 0 ~ 50 Degree C
Operating Humidity 10 ~ 95% (non-condensing)
Storage Temperature-20 ~ 70 Degree C
Storage Humidity 10 ~ 95% (non-condensing)

Download product Manuals, Datasheets and Whitepapers

Customer Reviews

No reviews yet

Write Your Own Review

Check items to add to the cart or Select All

 Copyright © 2012 Versa Technology, Inc. - All Rights Reserved.
 Toll-free: 800-989-2797 | Fax: 909-591-6962