100/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution
The Versa Technology VX-VEB160R4 is an Ethernet-over-VDSL2 Bridge with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VX-VEB160R4 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 20/4Mbps for 1.4km long range connections for lan extension.
Implements with Existing Telephone Copper Wires
The VX-VEB160R4 is also a Long Reach Ethernet (LRE) Bridge providing four RJ-45 Ethernet ports and two RJ-11 phone jacks, in which one is for VDSL connection and the other one is for POTS (Plain Old Telephone Service) connection. The VX-VEB160R4 has built-in POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VX-VEB160R4 into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VX-VEB160R4 is ideal to be used as an Ethernet extender to an existing Ethernet network.
Delivers High-Demand Service Connectivity for ISP / Triple Play Devices
The VX-VEB160R4 provides excellent bandwidth to satisfy ethernet extension by triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VX-VEB160R4 enables many Multi-Media services to work on local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.
Easy & Flexible Installation
The Ethernet-over-VDSL2 Bridge is plug-and-play design and fully compatible with all kinds of network protocols. Moreover, using this device for network extension, you'll find the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VX-VEB160R4 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VX-VEB160R4 and a CO mode VX-VEB160R4 must be setup as one pair of converters to perform the connection.
Provides Superior Upstream and Downstream Transmission Performance
The VX-VEB160R4 also defines symmetric band plan for the transmission of upstream and downstream signals; the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VX-VEB160R4 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VX-VEB160R4 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance.
VX-VEB160R4 Ethernet Extender Review & Demonstration Video
