| Power over ethernet poe Splitter Product Features: |
For the cost saving and power management purpose, Versa Technology releases a new 10/100Mbps Power over Ethernet splitter VX-PI100SP. The VX-PI100SP is an IEEE 802.3af Power over Ethernet device which split the 48V DC over the Ethernet cable into 5/12V DC power output. Work with the IEEE 802.3af power source equipment (PSE), the VX-PI100SP frees the device deployment from restrictions due to power outlet locations, which eliminates the costs for additional AC wiring and reduces the installation time.
When the PSE inserts DC Voltage into the CAT 5 cable, it allows the cable between the PSE and VX-PI100SP to transfer data and power simultaneously. The maximum distance between the PSE and VX-PI100SP is 100M. With being installed, the PSE combines the Ethernet digital data with power over the twisted pair cables as an injector, and the VX-PI100SP, the splitter, shall separate the digital data and the power into two outputs.
With IEEE 802.3af Power over Ethernet being installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device. The VX-PI100SP also has the benefits of cost saving as well as ease for networking planning and higher reliability. Furthermore, upon any IEEE 802.3af being installed, the VX-PI100SP can make the connection while migrating or splitting the power and the Ethernet digital packets. Providing two kinds of DC output, the VX-PI100SP offers 5V/2A & 12V/1A respectively.
|
 |
Complies with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u 10/100Base-TX |
|
Splits the 48V DC power over RJ-45 Ethernet cable into different DC output |
|
LED indicators power input indication
|
|
Distance up to 100 meters |
|
Adjustable two different output voltage options (5V/2A, 12V/1A) to fit various devices |
|
Auto-detect of POE IEEE 802.3af equipment, protect devices from being damaged by incorrect installation |
|
Works with EIA568, category 5,4-pair cables for 10Base-T or 100Base-TX
Back
to Top
|
|
Related Products |
VX-PI100SP & VX-PI100
POE Power Splitter & Injector Combo |
VX-PI100
POE Power Injector |
VX-PI100L
POE Power Injector with Surge / Lightning Protection
|
VX-Pi1000Gb
Gigabit Power Over Ethernet Injector |
VX-AP400 PRO
400mw High Power Wireless Access Point |
VX-AP250
200mw Dual-Network WIreless Access Point
and Repeater with Power Over Ethernet |
VX-SWP1608
16 Port 10/100 Mbps with 8 Port POE Web
Smart Ethernet Switch |
VX-SWP804
8 Port 10/100 Mbps with 4 Port POE Web Smart
Ethernet Switch |
VX-SWP2612
24 Port 10/100 Mbps with 12 Port POE + 2
Gigabit Web Smart Ethernet Switch |
VX-1026
Managed 24 Ports HPNA Switch |
|
| Power over ethernet poe Splitter Product Application: |
Connect to IEEE 802.3af devices:
Due to the capability of IEEE 802.3af standard, the VX-PI100SP can directly connect with any IEEE 802.3af end-nodes like wireless access point, IP phones and Internet camera where support IEEE 802.3af In-line Power over Ethernet port.
The IEEE 802.3af Injector and Splitter installation:
For a place hard to find the power inlet, VX-PI100SP, as a pair, should provide the easiest way to power your Ethernet devices such as Internet Camera on the ceiling, or, Wireless Access Point that is installed on the top of the building. It's the same with the IP phone used in office or home.
|
Back
to Top |
|
Model |
|
| Standard |
IEEE 802.3af, IEEE 802.3, IEEE 802.3u, 10/100Base-TX |
Ethernet Connector |
2 X RJ-45 (1 for Data + DC out, 1 for Data in) |
Ethernet Data rate |
10/100Mbps (Vary on Ethernet device attached) |
DIP Switch |
5VDC / 2A & 12VDC / 1Aoutput voltage |
Number of device can be powered |
1 |
Ethernet Cable |
TIA/EIA-568, Category 5/5e cable |
LED Indicator |
Lights to indicate the port is providing 48VDC in-line power |
Dimension (W x D x H) |
73 x 55 x 24mm |
EMI |
FCC Class B, CE mark |
|
|
Home
> Products
& Solutions >
POE
> VX-PI100SP
