| |
|
|
|
| VX-SWP2612 Web SMart
Ethernet Switch Overview: |
| Related
Products |
VX-SWP804
8 Port 10/100 Mbps with 4 Port POE Web Smart
Ethernet Switch |
VX-SWP1608
16 Port 10/100 Mbps with 8 Port POE Web
Smart Ethernet Switch |
|
Another Power
over Ethernet end-span product comes to PLANET
PoE solution. The VX-SWP2612 offers 12 PoE power
injector TP ports on a 24-Port web smart Fast
Ethernet switch which offers a flexible choice
of PLANET PoE switches.
VX-SWP2612 provides 24 10/100Mbps
Fast Ethernet ports and 2 fixed 10/100/1000Mbps
ports (either Gigabit copper or SFP) which also
combines the Power over Ethernet technology that
be able to supply standard 48VDC PoE power on
the first 12 of the 24 10/100Mbps TP ports. The
2 additional gigabit TP/Mini-GBIC interfaces can
be optionally connected with 10/100/1000Base-TX
cable, 100Base-FX, or 1000Base-SX/LX fiber-optic
cables which distance can be extended from 100
meters (TP), 2 kilometers (Multi-mode, ST or SC),
up to 70 kilometers (Single-mode, SC / WDM / SFP).
The switch is equipped with
non-blocking 8.8Gbps backplane greatly simplify
the tasks of upgrading your LAN to cater to increased
bandwidth demands. The PoE, in-line power, following
the standard IEEE802.3af, makes the switch able
to power 24 PoE devices at the distance up to
100 meters through the 4-pair Cat 5/5e UTP wire.
For efficient management, the
Web Smart Switch is equipped with console and
Web interface and can be programmed for basic
switch management functions, such as port speed
configuration, Port Trunking, VLAN, Port Mirroring,
QoS, bandwidth control, PoE power inject priority
and Misc Configuration including IP, password
settings.
The Switch provides port-based
VLAN (including overlapping). The VLAN groups
allowed on the switch will be maximally up to
26 for port-based VLAN. Via supporting port trunking,
the Switch allows the operation of a high-speed
trunk connecting to multiple ports. The Switch
also provides seven groups of up to 4-ports for
trunking, and it supports fail-over as well.
Back
to Top |
|
VX-SWP2612 Features: |
 |
Complies with
the IEEE802.3, IEEE802.3u, IEEE802.3z and
IEEE802.3ab Gigabit Ethernet standard, IEEE802.3af
Power over Ethernet standard |
|
12 of the 24 10/100 Mbps
Fast Ethernet ports with PoE support |
|
Either 10/100/1000Base-T
or SFP (Mini GBIC) Gigabit Ethernet for flexibility
install and extension |
|
Each RJ-45 ports support
auto-negotiation -10/20, 100/200Mbps, auto
MDI detection |
|
Prevents packet loss with
back pressure (half-duplex) and 802.3x PAUSE
frame flow control (full- duplex) |
|
High-performance Store
and Forward architecture, broadcast storm
control, runt/CRC filtering eliminates erroneous
packets to optimize the network bandwidth |
|
6K MAC address table, automatic
source address learning and ageing |
|
4 Mbit embedded memory
for packet buffers |
|
Console and Web interface
for Switch basic management and setup |
|
Support up to 26 port-based
VLAN groups |
|
Support up to 7 Trunk groups,
each trunk for up to maximum 4 port with 800Mbps
bandwidth |
|
Port mirroring allows monitoring
of the traffic across any port in real time |
|
Support QoS and bandwidth
control on each port |
|
Power injection priority
support for order of power feeding to the
remote equipments |
|
|
| VX-SWP2612
Product Specification: |
| Model: |
2612 |
| Hardware Specifications: |
| Ports: |
24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports |
| Module Slot: |
2 fixed 10/100/1000Base-T RJ-45, SFP (Mini
GBIC); Either TP or SFP |
| POE Ports: |
12 (port#1 to port#12); IEEE802.3af power
injection |
| Switch Processing Scheme: |
Store-and-forward |
| Address Table: |
6K entries |
| Share Data Buffer: |
4Mbit |
| Throughput: |
6.6Mpps |
| Switch Fabric: |
8.8Gbps |
| Flow Control: |
Back pressure for half duplex, IEEE 802.3x
Pause Frame for full duplex |
| Dimensions: |
440 x 260 x 44 mm (W x D x H), 1U height |
| Weight: |
3.3 kg |
| Power Requirement: |
100~240 VAC, 50/60Hz |
| Power Consumption/Dissipation: |
130 Watts maximum;400 BTU/hr maximum |
| Temperature: |
Operating: 0~50°C; Storage -40~70°C |
| Humidity: |
Operating: 10% to 90%; Storage: 5% to 95%
(Non-condensing) |
| Smart Function:
|
| System Configuration: |
Console port and Web interface |
| Port Configuration: |
Port disable/enable
Auto-negotiation disable/enable
10/100Mbps full and half duplex mode selection
Flow control disable/enable
PoE power supply enable/disable, power feeding
priority |
| Port Status: |
Display each port's disable/enable status,
each port¡¦s link status, and
speed duplex mode, flow control status
PoE power consumption, power injection status |
| Port Trunking: |
Support 7 groups of 4-Port trunk support |
| VLAN: |
Maximum up to 26 VLAN groups for port-based
VLAN |
| Port Mirroring: |
1 Mirroring port to monitor several mirrored
ports. The monitor modes are Disable, RX,
TX, TX& RX |
| QoS: |
Allow to assign low and high priority on
each port |
| Bandwidth Control: |
Allow to assign rate control on each port |
| Standards
Conformance: |
| Regulation Compliance: |
FCC Part 15 Class A, CE |
| Standard Compliance: |
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3z(Gigabit Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
IEEE802.3x (Flow control)
IEEE 802.1p QoS
IEEE802.3af Power over Ethernet
Back
to Top |
|
|
|
|
Home
> Products
& Solutions >
Switches
> VX-SWP2612
