| |
 |
|
|
| 24 port Gigabit Web SMart Switch Overview: |
| Related
Products |
VX-PI100
POE Power Injector |
VX-SWP1608
16 Port 10/100 Mbps with 8 Port POE Web
Smart Ethernet Switch |
WSW-2401A
24 Port 10/100 Mbps + 1 Port 100Base FX Open Slot Managed Switch |
VX-SWP2612
24 Port 10/100 Mbps with 12 Port POE + 2
Gigabit Web Smart Ethernet Switch |
|
The VX-SWP2620CS provide 24 10/100Mbps Fast Ethernet ports and two Gigabit Ethernet ports, either TP or SFP per port. The two Gigabit ports can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable) interfaces. The distance can be extended from 100 meters (TP), 550 meters (Multi-mode fiber), up to above 10/20/30/40/50/70/120 kilometers (Single-mode fiber).
The VX-SWP2620CS, equipped with non-blocking 7.2 / 8.8Gbps backplane, greatly simplifies the tasks of upgrading users’ LAN for catering to increase bandwidth demands.
For efficient management, the VX-SWP2620CS, 24-Port 10/100Mbps + 2 Gigabit TP / SFP Combo Web Smart Switch are equipped with remote Web interface. The VX-SWP2620CS can be programmed for advanced switch management functions such as port configuration, port-based / IEEE 802.1Q / MTU VLAN, port mirroring, port trunk, QoS, bandwidth control, broadcast storm control, MAC address / TCP & UDP filter and IGMP Snooping v1 / v2.
The VX-SWP2620CS provide port-based / IEEE 802.1Q / MTU VLAN (port-based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allowed on the VX-SWP2620CS can be maximally up to 26 for port-based / 32 for IEEE 802.1Q VLAN groups. The MTU VLAN also divides port 1 to port 16/24 as separated LAN group and it only can access the public port 17, 18 or port 18 / port 25, 26 or port 26. Via supporting port trunking, the VX-SWP2620CS allow the operation of a high-speed trunk combining multiple ports. The VX-SWP2620CS also provide two groups of up to 4-ports for trunking, and it supports fail-over as well.
With its Auto-Negotiation capability, all the RJ-45 / STP ports of Web Smart Switch can be configured to speeds of 10/20Mbps / 100/200Mbps (Fast Ethernet) and 2000Mbps (Gigabit Ethernet) automatically. In addition, the products are equipped with the MDI / MDI-X auto-detection for easily plug and play connection, regardless of cabling types-straight through or crossover.
Back
to Top |
|
24 port Gigabit Web SMart Switch Features: |
 |
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard |
|
24-Port 10/100Mbps Fast Ethernet Switch |
|
2 10/100/1000Mbps ports share with 2 SFP interfaces
|
|
Each Switching port supports auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) , 2000Mbps (Gigabit Ethernet) |
|
Auto-MDI / MDI-X detection on each RJ-45 port |
|
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x PAUSE frame
flow control (full-duplex) |
|
High performance of Store and Forward architecture, broadcast storm control and
runt / CRC filtering eliminate erroneous packets to optimize the network andwidth |
|
4K MAC address table, automatic source address learning and ageing
|
|
2.75Mb embedded memory for packet buffers |
|
Web operation interface for remote Switch management and setup |
|
Supports Broadcast Storm Control |
|
Supports up to 18/26 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU
VLAN |
|
Supports up to 2 Trunk groups, and each trunk can be up to maximum 4 port with
800Mbps bandwidth |
|
Supports QoS , bandwidth control and MAC address filter / TCP and UDP filter on
each port |
|
Supports port mirroring function and IGMP Snooping v1 / v2
|
|
Firmware upgrade through Web interface |
|
Password setting, IP setting and devices description setting through Planet Smart
discovery utility
|
|
19-inch rack mount size |
|
Suitable Internal full-range power supply for worldwide use
|
|
EMI standards complies with FCC, CE class A
|
|
|
| 24 port Gigabit Web SMart Switch Specification: |
| Model: |
VX-SWP2620CS |
| Ports |
24 8 10/ 100/1000Base-T RJ-45 Auto-MDI / MDI-X ports |
| Gigabit Ports |
2 10/100/1000Mbps ports share with 2 SFP interfaces |
| Switch Processing Scheme |
Store-and-Forward |
| Throughput (packet per second) |
6.54Mpps |
| Swtich Fabric |
8.8Gbps |
| Address Table |
4K entries |
| Share Data Buffer |
2.75Mb embedded memory for packet buffers |
| Flow Control |
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex |
| Dimensions |
440 x 120 x 44 mm (1U height) |
| Weight |
1.64 kg |
| Power Requirement |
100~240V AC, 50-60 Hz, 0.5A |
| Power Consumption / Dissipation |
19 watts / 64BTU |
| Temperature |
Operating: 0~50 degree C
Storage: -40~70 degree
|
| Humidity Operating |
5% to 90%, Storage: 5% to 90% (Non-condensing) |
| System Configuration |
Web interface |
| Port Configuration |
Port speed duplex mode selection
Flow Control disable / enable
Port disable / enable, Port description on each port |
| Bandwidth Control |
Yes,1 / 2 / 4 / 8 / 16 / 32 / 64Mbps |
| Broadcast Storm Control |
Yes, 5% / 10% / 25% / 50% / Disable |
| Port Statistics |
Display each port's detail Ethernet traffic counter information |
| VLAN |
18/26 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN |
| Port Trunking |
Support 2 groups of 4-Port trunk support, up to 800Mbps bandwidth per trunk |
| Port Monitoring |
Port mirroring allows monitoring of the traffic across any port in real time |
| QoS |
Allows to assign low / high priority on each port
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
|
| AC Address / TCP & UDP Filter |
Yes |
| IGMP Snooping v1 / v2 |
Allows to disable or enable |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Standard Compliance |
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
IEEE 802.3z (Gigabit Ethernet)
IEEE 802.3x (Full-duplex flow control)
IEEE 802.1Q VLAN
IEEE 802.1p QoS |
|
|
|
|
Home
> Products
& Solutions >
Switches > VX-SWP2620CS
