 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Home
> Products
& Solutions >
Switches
> VX-SWP804 |
  |
 |
| |
|
|
|
| VX-SWP804 Web SMart
Ethernet Switch Overview: |
| Related
Products |
VX-SWP1608
16 Port 10/100 Mbps with 8 Port POE Web
Smart Ethernet Switch |
VX-SWP2612
24 Port 10/100 Mbps with 12 Port POE + 2
Gigabit Web Smart Ethernet Switch |
|
For cost saving
and flexible using of PoE power provision, half
of the 10/100Mbps TP ports of 804 provide PoE
power injector function which is able to drive
4 IEEE802.3af compliant powered devices.
For SOHO or department network,
the switch also provides a simple, cost-effective,
and highly reliable network connection for data
as well as power. Furthermore, it is the ideal
device for bridging among Ethernet, Fast Ethernet
workgroups and networks.
With data and power over Ethernet
from one unit, the VX-SWP804 shall reduce cables and
eliminates the need for dedicated electrical outlets
on the wall, ceiling or any unreachable place.
A wire carries both data and power lowering the
installation costs, simplifying the installation
effort and eliminating the need for electricians
or extension cords. We are also proud of the key
feature ¡V energy saving. With more efficient
switching power supply, the efficiency of the
VX-SWP804 would be much better than four linear power
adapters in a long run.
Providing 4 PoE interfaces,
the VX-SWP804 is ideal for small business and workgroups
requiring to deploy the PoE for the wireless access
points, IP-based surveillance camera or IP phones
in any places easily, efficiently and cost effective.
The smart functions make it
easy to survey and control the PoE power provision
to the devices by the Web and Console interface.
Basic switching functions such as VLAN, Trunk,
QoS are available for network management.
Back
to Top |
|
VX-SWP804 Features: |
 |
8-Port 10/100Mbps
Fast Ethernet ports |
 |
4-Port support 48VDC power
to PoE Powered Device. |
 |
Hardware based 10/100Mbps
auto-negotiation. |
 |
Flow control for full duplex
operation and back pressure for half duplex
operation |
 |
Integrates address look-up
engine, support 2K absolute MAC addresses |
 |
Automatic address learning
and address aging |
 |
Supports Auto MDI/MDI-X
function |
 |
LED indicators for easy
network diagnostic |
 |
Web/Console management |
 |
VLAN for network segregation |
 |
Port trunk bandwidth aggregation |
 |
Per port High/Low transmission
priority configuration |
 |
PoE power Disable/Enable
by management interface |
 |
PoE power consumption monitoring |
 |
Ethernet standards comply
with IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet,
IEEE802.3x Flow Control and IEEE802.3af Power
over Ethernet. |
 |
EMI standards comply with
FCC, CE class A. |
|
|
| VX-SWP804
Product Specification: |
| Model: |
804 |
| Network Connector: |
8-Port RJ-45 for 10/100TX
4-Port with PoE injector function |
| LED Display: |
One power
1-4 port PoE in-use, LNK/ACT, 100
5-8 port LNK/ACT, 100 |
| Switch Architecture: |
Store and forward switch architecture. Back-plan
up to 1.6Gbps |
| MAC Address: |
2K MAC address table with Auto learning
function |
| Remote Power Feeding: |
End-point insert type and compatible with
IEEE802.3af
Per port feeding power: 15.4Watts (maximum) |
| Management: |
Web/Console management |
| VLAN: |
Port-Based VLAN, up to 8 groups |
| Port Priority: |
High/Low |
| Storm Control: |
Disable, 10%, 20%, 40% 4 levels |
| Port Trunk: |
Port #7 and #8, fixed |
| POE Power Control: |
Power provision Enable/Disable, priority
configuration |
| Power: |
AC 100~240V, 50/60Hz
Max. 45 watts power consumption |
| Operating Environment: |
0~40 Degree C, 10%~95%RH |
| Storage Environment: |
-40 ~70 Degree C, 95% RH |
| Dimension (W x D x H) |
217 x 135 x 43 mm |
| EMI |
FCC Class A, CE |
| Standard Compliance: |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
Back
to Top |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copyright © 2007, Versa Technology, Inc All Rights Reserved. | xDSL Technology
|
|