 |
|
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 Home
> Products
& Solutions >
Switches
> FGSW-2620VM |
  |
|
| |
|
|
|
| FGSW-2620VM
Planet 24 port 10/100 Mbps + 2 Gigabit TP/SFP Combo
Managed Ethernet Switch: |
| Related
Products |
VX-SWP804
8 Port 10/100 Mbps with 4 Port POE Web Smart
Ethernet Switch |
VX-SWP2612
24 Port 10/100 Mbps with 12 Port POE + 2
Gigabit Web Smart Ethernet Switch |
WSD-800
8 Port 10/100 Mbps Managed Ethernet Switch |
|
The PLANET FGSW-2620VM
offers 24 10/100Mbps Fast Ethernet ports with
2 Gigabit TP/SFP combo ports (Port-25, 26). The
2 Gigabit TP/SFP combo ports can be either 1000Base-T
for 10/100/1000Mbps or 1000Base-SX/LX through
SFP (Small Factor Pluggable) interface. PLANET
FGSW-2620VM boasts a high performance switch architecture
that is capable of providing non-blocking switch
fabric and wire-speed throughput as high as 8.8Gbps.
Its 2 built-in GbE uplink ports also offer incredible
extensibility, flexibility and connectivity to
the Core switch or Servers.
With it's built-in web-based
management, the FGSW-2620VM offers an easy-to-use,
platform-independent management and configuration
facility. The FGSW-2620VM supports standard Simple
Network Management Protocol (SNMP) and can be
managed via any standard-based management software.
The IEEE 802 standard-based
firmware provides a rich set of features and ensures
interoperability with equipment from other vendors.
Additionally, the firmware includes advanced features
such as IGMP snooping, broadcast storm control,
Access Control List and MAC address filtering,
to enhance security and bandwidth utilization.
For efficient management, the
FGSW-2620VM Web Smart Switch is equipped with
web interface. The FGSW-2620VM can be programmed
for basic switch management functions such as
port speed configuration, Port Trunking, Port-based
VLAN, Port Mirroring, QoS, bandwidth control,
Access Control list and Misc Configuration.
The FGSW-2620VM provides port-based
VLAN (including overlapping) and 802.1Q tag-based
VLAN. The VLAN groups allowed on the FGSW-2620VM
will be maximally up to 26 for port-based VLAN.
Via supporting port trunking, the FGSW-2620VM
allows the operation of a high-speed trunk combining
multiple ports. The FGSW-2620VM provides seven
groups of up to 8-ports for trunking and it supports
fail-over as well.
Back
to Top |
|
FGSW-2620VM Applications: |
|
Workgroup
Switch
With 24 10/100Mbps
ports and 2 Gigabit TP/SFP combo ports, the switch
provides a cost-effective and high-performance
solution for SMB and campus networks.
Department
Switch
With its 8.8 Gigabits per second and non-blocking
switch fabric, the FGSW-2620VM can easily provide
a local, high bandwidth, Fast Ethernet network
for departmental backbone. With these two Gigabit
TP/SFP combo ports, the FGSW-2620VM provides the
uplink to the backbone network through either
Fast Ethernet fiber-optic or Gigabit Ethernet
SX/LX modules.
MTU
Switch
In an MTU / MDU application,
the advanced functionality of the FGSW-2620VM
eliminates traditional problems associated with
Ethernet. Using the built-in VLAN functionality
can segregate users. The flexible fiber module
options make the FGSW-2620VM be one of the best
and most cost-effective switch solutions for multi-tenant
service providers.
|
| FGSW-2620VM
Features: |
| |
| FGSW-2620VM
Product Specification: |
| Model: |
FGSW-2620VM |
Hardware
Specification: |
| Ports |
24 10/100Base-TX RJ-45 Auto-MDI / MDI-X
ports |
| Module Slots |
2 Gigabit TP/SFP combo ports |
| Switch Processing Scheme |
Store-and-forward |
| Throughput (Packet per
second) |
6.547Mpps |
| Switch Fabric |
8.8Gbps |
| Address Table |
8K entries |
| Share Data Buffer |
512K Bytes |
| Flow Control |
Back pressure for Half-Duplex, IEEE 802.3x
Pause Frame for Full-Duplex |
| Dimensions |
440 x 120 x 44 mm, 1U height |
| Weight |
1.87kg |
| Power Requirement |
100~240V AC, 50-60 Hz |
| Power Consumption/Dissipation |
13.5 Watts maximum / 46 BTU / hr maximum |
| Temperature |
Operating: 0~50 degree C, Storage -40~70
degree C |
| Humidity
Operating |
10% to 90%, Storage: 5% to 95% (Non-condensing)
Back
to Top |
Layer
2 Function |
| System Configuration |
Web interface, SNMP v1 |
| Port Status |
Display per port’s
disable / enable status. Link status, Flow
control status and speed duplex mode per port. |
| Port Configuration |
Per port disable / enable,
Auto-negotiation disable / enable. Flow control
disable / enable and bandwidth control on
each port |
| Trunk Configuration |
Supports 13 groups of 8-Port
trunk |
| VLAN Configuration |
IEEE 802.1Q Tag-Based
VLAN and Port-based VLAN.
Supports maximum up to 26 VLAN groups |
| Spanning Tree Protocol |
IEEE 802.1w Rapid Spanning
Tree |
| Port Monitoring |
One Mirroring port to monitor
one mirrored port. The monitor modes are RX,
TX and RX and TX |
| IGMP Snooping |
Supports v1 and v2 protocol.
Supports IGMP Querier |
| QoS Configuration |
IEEE 802.1p QoS on each
port; 4 priority queues per port |
| Port Counters |
Display detail traffic
counters on each port |
| Rate Limit |
Inbound Rate Limit and
Outbound Traffic shaping; allow per 1Mbits
setting |
| Access Control
List |
Supports up to 16 Access
Control list groups |
| SNMP MIBs
Supported |
RFC-1213 MIB II
Back
to Top |
Standards
Conformance |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Standards Compliance |
IEEE 802.3 - 10Base-T
Ethernet
IEEE 802.3u - 100Base-TX Fast Ethernet
IEEE 802.3ab - 1000Base-T Gigabit Ethernet
IEEE 802.3z - 1000Base-SX/LX Gigabit Ethernet
IEEE 802.3x - Full-duplex Flow Control
IEEE 802.1p - Class of Service
IEEE 802.1X - Port-Based Authentication
IEEE 802.1Q - Tag-Based VLAN
IEEE 802.1w - Rapid Spanning Tree
Back
to Top |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copyright © 2007, Versa Technology, Inc All Rights Reserved.
| xDSL Technology
|
|
