VEB-170R1: Single Port ADSL Loop Repeater/Extender

English

Español

Sitemap

Home > Products & Solutions > Repeaters > VEB-170R1

Ethernet to Coax Modems

Tel: 909-591-8891

Fax: 909-591-6962

Email: info@versatek.com

Free quote & solutions draft.

		Product Images		Data Sheet (PDF)		Tech Support
		Product Specifications		Manual		Download

Single port ADSL Loop REpeater/Loop Extender Description:

Related Products

VX-2000MD
Med-Density 16 Line Card Slots Chassis

VX-2000-HD
High-Density 16 Line Card Slots Chassis

ADSL technology has great advantages in terms of bandwidth and performance and is the major broadband access technology. However, the longer the distance between CO and CPE, the lower the speed ADSL can achieve.

VEB170R1 can extend the coverage of single ADSL line and resolve the above issue very well. It will provide systems with higher performance-to-cost ratio for telecom operators, improve the equipment utilization rate, optimize the network and boost the ability to compete. Along with protection of current investment, this ADSL repeater can have more broadband access subscribers and value-added services accommodated by extending coverage of existing ADSL network. As the result, it will bring back huge return.

VEB170R1 Product Features:

ADSL Loop Repeater / Loop Extender Product Features:
	Extend the transmission distance between CO DSLAM and CPE Mode m. Ensure the upstream/downstream rate is no less than 128kbps/512kbps.
	Deploying with traditional ADSL system: the repeater can extend the range between DSLAM and Modem from 3.5KM to 5.5KM~6KM without affecting existing POTS service
	Deploying with ADSL2+ system: the repeater can extend the cover range of DSLAM from 5.5KM to 6KM~7.5KM without affecting existing POTS service.
	Avoid customer loss due to broadband service unavailability caused by extra long distance
	Improve network bandwidth and service quality.
	Comprehensive thunder lightening, over-current and over-voltage protection.
	Easy to install, deploy and maintain.
	Fully compatible with all ADSL/ADSL2+ system.
ADSL Loop Repeater / Loop Extender Power Supply
	The power source includes remote supply and local supply. For the ADSL/POTS coexisting line user, extra wire pair is needed to power the ADSL repeater if remote supply is required.
	Single channel output power is less than 10W.
	Easy to install and deploy.
	User selectable AC110-240V or DC48V supply voltage. No Polarity for DC input to easy the installation.
Back to Top

VEB170R1 Technical Specifications:

VEB170R1 Technical Specification:		Technical Specification of One Channel Power Supply*:
Input Voltage	Powered by ADSL Loop Repeater/Loop Extender Power Supply	Outside Dimensions	118mm x 34mm x 34mm
Input Voltage	Powered by ADSL Loop Repeater/Loop Extender Power Supply	Weight	< 0.5 Kg
Power Consumption	1.3 W / line	Temperature	35°C to 50°C
Weight	< 1.5 Kg	Relative Humidity	5% to 95% (non-condensing)
Temperature	40°C to 60°C	Input Voltage	AC 100-240V or DC -48 (-36V to -72V)
Relative Humidity	5% to 95% (Non-condensing)	Output Voltage	DC116V
		Max. Output Power	10 W
		Max Output Current	100 mA
*(If VEB170R1 is deployed with four-channel power supply, Please refer to user manual of four-channel power supply) Back to Top