VersaXpress
-VER170P ADSL2+ device provides the advanced long
Reach/Rate, crosstalk-free Technology with backward
compatible ITU G.ADSL Plus, G.span, G.992.3, G.992.1
(G.DMT), ITU-TG.992.2 (G.lite), ANSI T1.413 issue
2 standards and with multimode modulation auto
configurable capabilities. The ADSL2+ is a modem
technology that uses existing phone lines to provide
the high speed Internet access.
It provides Reach/Rate control capability with
up to 24.0 Mbps speed access at distance up to
2,000ft (600m), 17.0Mbps 7,000ft (2,100m), and
108Kbps 22,500ft (6,800m) by sharing the existing
phone line.
Backwards compatible and
auto-detect, auto link with standard ADSL
G.DMT,
G.Lite, and T1.413 i2 devices.
Provides optimal rate/research
performance.
- Higher rates by limiting reach (24.0Mbps
Down / 2.2Mbps Up , up to 600m .)
- Longer reach by reducing rate (17.0Mbps
Down / 1.0Kbps Up, up to 2,100m .)
- Maximum reach at lower rate (108Kbps Down
/ 88Kbps Up, up to 6,800m .)
Egress control for compatibility
with existing HomePNA or other services.
PSD (Power Spectral Density)
masks for co-existence with existing ADSL
service.
Supports packets transmit
and receive statistics report.
Lan:
1x 10/100Mbps auto-negotiating
port
802.3, 10BaseT, 802.3u,
100Base-TX.
Automatic MDI/MDIX crossover
for 100Base-TX or 10Base-T port.
QoS support with four priorities.
QoS determined by port,
IEEE 802.1p tagged frames, IPv4's TOS &
Differentiated
Services, DA MAC address and IPv6's traffic
Class.
Home
>
Products & Solutions > ADSL2+ Modems
> VX-VER170P
