VX-100WR: Wireless AP / Router / Client Adapter

English

Español

Sitemap

Home > Products & Solutions > Wireless > VX-100WR

Ethernet to Coax Modems

Tel: 909-591-8891

Fax: 909-591-6962

Email: info@versatek.com

Free quote & solutions draft.

Our Price: $79

Product Images

Data Sheet (PDF)

Tech Support

Product Specifications

Manual (ZIP)

Download

Wireless AP/Router/Client Adapter - Internet Sharing Gateway Product Description:

Related Products

VX-AP250
200mw Dual-Network WIreless Access Point and Repeater with Power Over Ethernet

VX-100WB
Wireless Client Adapter - Internet Sharing Bridge

VX-100WR is a simple, low cost 802.11g Wireless Client adapter, Access Point and Router.
Access Point Mode: VX-100WR provides a simple method to create a high-speed 802.11g Wireless LAN and link it to an existing wired LAN.
Router Mode: VX-100WR allows all Wireless Stations to share a single public IP address on the LAN or WAN. It also acts as an Access Point, DHCP Server, NAT Router, and Firewall for the client wireless stations. VX-100WR supports PPPoE/DHCP/Fix-IP for WAN connections.
Client Mode: VX-100WR acts as a Wireless Adapter which enable LAN device (ex. LAN-printer, XBOX, Notebook/Desktop) to connect the wireless network. VX-100WB supports both AD-HOC and Infrastructure mode. A convenient sliding switch on the side on the VX-100WB allows you to change modes without using any software. VX-100WR’s wireless speeds up to 54Mbps and support features such as WEP and WPA-PSK data encryption.

VX-100WR Features:

3 in 1 - Wireless AP / Router / Client Adapter

802.11g and compatible with 802.11b

Select Client/AP/Router modes by a convenient sliding switch

AP Mode – Transparently connect PCs to a LAN

Router Mode – Share one public IP Address between Wireless Clients, supports PPPoE/DHCP/Fix-IP

Client Mode – Enable wired-client device (e.x. LAN-Printer) to connect 802.11g/b Wireless network

Basic Features		Advanced Features
	802.11b/802.11g Access Point		AP/Router/Client Mode
	Auto SSID configuration		DHCP Server for Wireless clients
	Web-based management, with "Config" mode to guarantee HTTP management connection is possible		DHCP Client or fixed IP for LAN/WAN
			Login to LAN/WAN using PPPoE, PPTP, L2TP, if required.
	Convenient hardware switch to change modes		Firewall protection for Wireless clients
	Convenient hardware switch to change modes		Port Forwarding, DDNS support
	WPA & WPA-PSK security		ALGs (Application Level Gateways), DMZ
	MAC-level Wireless station access control

VX-100WR Specifications:

Protocols	NAT, PPPoE, NTP, HTTP, DHCP, TCP/IP, UDP, PAP, CHAP, RIP1, DDNS
VPN Pass Through:	PPTP, IPSec, L2TP
Management:	Web-based Management
Wireless Standards:	IEEE 802.11b, IEEE 802.11g
Wireless Data Rate:	1~54 Mbps
WEP:	64/128Bit, WPA-PSK (TKIP) supported
Antenna:	Antenna Build-in
Modulation:	Direct Sequence Spread Spectrum (DSSS), BPSK, QPSK, CCK
LAN Port:	1 x RJ45 10/100 Base-T auto sensing with uplink automatic facility
LED	1xPower, 1x Ethernet, 1x Wireless
Power:	DC5V, 2A
Dimension:	102.5mm(L) x 70mm(W) x 22mm(H)