Yes, while in configuration terminal type in: int range fe1-24 (Switch Ports) or vdsl int range v1-v24 (DSL Ports)
The DSLAM does not have web interface capability. Management is done by either a Telnet session, or by console.
By default, the DSLAM does not have an IP address set. This is set by the user upon configuring.
IP address will be set on the Ethernet Management port.
When logged into through console, type “enable” enter, then type “copy config factory-default-config startup-config” enter.  Restart the DSLAM, all settings will revert to factory settings.