How to Improve Wi-Fi Reception by Boosting Roaming Aggressiveness

What is WLAN roaming?

How to Improve Wi-Fi Reception by Boosting Roaming Aggressiveness

Wireless Local Area Networking (WLAN) automatically connects your client device to an access point (AP) with the strongest signal in an RF environment whose access points have the same SSID. But did you know that you can boost your wireless roaming aggressiveness to increase the frequency at which your client device will search for nearby AP’s broadcasting a better signal quality? Keep reading to find out how!

Receive a Complementary Consultation


What is WLAN Roaming?

WLAN roaming automatically connects your client device to an access point with the strongest signal in an RF environment. WLAN Roaming StandardsWireless network cards in client devices continuously listen for nearby APs with the same SSID. When a client device approaches an alternative AP with a stronger signal, the client can connect to this new AP without triggering service interruptions in e-mail and web applications. (Voice data however, is more susceptible to dropping frames when a client device roams onto a new AP.)

WLAN roaming prevents the user from having to re-log back into a Wi-Fi network with the same SSID when it associates with a new AP. This makes it simple for a WLAN client to take their laptop from a sales department for example, and bring it into different locations, such as a warehouse, without having to re-login to a different wireless access point.



How does WLAN roaming work?

When a wireless client device approaches an AP with a stronger signal, the client device must associate with the new AP and disassociate its connection from the old AP. This process is known as the “handoff” process that occurs automatically.  The “handoff’ process consists of the following steps:

Step 1: Scanning

When the RSSI (Received Signal Strength Indicator) values begin to drop in a client device, it will search for nearby APs with the same SSID that are broadcasting a stronger signal.

Step 2: Authentication

If the client device finds an available AP, it sends a request to access the new AP. The client device patiently waits to get approved or rejected by the new AP.

Step 3: Re-Association

If the new AP approves the request, the client will send a re-association request and complete the hand off process by disassociating from the old AP.

How long does the handoff process take?

The handoff process is typically unnoticeable by the user and takes less than ½ a second.

What is roaming aggressiveness and how can it improve my wireless reception?

Roaming aggressiveness refers to the interval time and conditions that will trigger a wireless network card to search for and connect to an alternative AP. Boosting your roaming aggressiveness increases the rate at which your network card will seek out an AP with a stronger signal. Adjusting roaming aggressiveness adjusts the sensitivity of your wireless network card to nearby APs.

Who can benefit from adjusting roaming aggressiveness?

Users using a shared Wi-Fi network in a small business, enterprise, campus, or a home with multiple access points can benefit from WLAN roaming.

Are there any downsides to adjusting wireless roaming aggressiveness?

The only downside is that there is no quick way to simultaneously adjust the wireless aggressiveness of several client devices. IT departments in a campus that lends laptops for example, will need to set up the wireless aggressiveness of these client devices individually.

How Do I setup Roaming Aggressiveness on my computer?

Click the video to learn how to setup your roaming aggressiveness!

The following steps will show you how to change your roaming aggressiveness on Windows PC:

  • Navigate to the Start Menu to access your Control Panel
  • Click on Network and Internet
  • Click on Network and Sharing Center
  • Under Connections select Wi-Fi
  • Click Properties
  • Select Client for Microsoft Networks
  • Click Configure
  • Click the Advanced Tab
  • Select Roaming Aggressiveness
  • Select your preferred Value from the drop down menu.

Please note: If you are using a Ralink Wi-FI network adapter, click Roaming Sensitivity and select your preferred Value from the drop down menu. Ralink uses the term roaming sensitivity instead of roaming aggressiveness.

Setting your roaming aggressiveness to a higher value will trigger your client device to look for APs more frequently. Your client device will not roam when set to the lowest setting unless it experiences severe link quality degradation.

Will this tutorial work with any laptop?

This tutorial will work for laptops that have Intel and Realtek networking cards.

How do I setup Roaming Aggressiveness on my phone?

Not all cell phones have been natively optimized to set up roaming aggressiveness. If your cell phone uses an Android platform, you may be able to install WiFi Roaming Fix, a third-party app that allows users to tinker with their roaming aggressiveness. For a more in-depth tutorial to Wi-FI Roaming Fix, click here.

Did you know that Elon Musk is supporting an entrepreneurial initiative to build micro satellites that will transmit Internet access “to the unfettered masses”? Click here to find out more!

Share this post

Comments (6)

  • Angelo Reply

    Hi very interesting post, I have qualcomm atheros 946x wireless card without this setting, I tried to modify “scan valid interval” setting (sole setting similar to Roaming aggressiveness) but no good news, same behavior with a disconnection 25 between bouncing on other AP (same full mesh)
    Any clue/experience on atheros Cards?

    February 8, 2017 at 4:18 am
    • Akash Purohit Reply

      I have qualcomm atheros 2.5 Ghz. And i am facing the same problem, i have tried re-installing, updating, including disabling ipv6 but the problem persists. Please let me know if you found a solution.

      November 25, 2017 at 1:36 am
  • Reginald K Jones Reply

    This works for known networks, but unknown, may be a problem in connecting at all, as the signal in a unknown environment, may push the known ap down under the unknown network, as the unknown ap will be the one your device will try to connect to, because of stronger signal. The more unknown networks, that are stronger than the known network, will make it harder, to impossible, with aggressive roaming.

    July 8, 2017 at 2:19 am
  • Peter Parker Reply

    It is having the bost of the work that is going to make it for the several ways to improve it for the wifi reception by boosting the roaming for the forgiveness which is having it the best part around it and need to have the several changes for it.

    August 22, 2018 at 12:33 pm
  • Grillo Reply

    It also means that for networks with a single access point (domestic, small companies…) setting roaming aggressiveness to lowest might be better.

    April 24, 2019 at 10:02 am
  • jorick Reply

    THE BLOG is outstanding, educational and informative especially for those who are not so techno-savvy and non-professional like me.

    August 16, 2019 at 2:15 am

Leave a Reply

Your email address will not be published. Required fields are marked *