Power over Ethernet Extenders
POE Ethernet Extenders from Versa Technology
Versa Technology’s Power over Ethernet (PoE) Extenders allow network administrators to extend their networks beyond the standard 100m unit limit of twisted pair Ethernet. Utilizing CAT5e/6 UTP cable, our PoE extenders offer a simple plug and play installation to make it easy to extend the distance of a network. Versa technology offers a diverse range of PoE extenders that support a variety of distances. Our IEEE-compliant units can be daisy chained to support longer distances. We also offer the VX-160COAX, a PoE Extender over Coaxial Kit.
2E10-110-KIT-A Indoor Ethernet & Power over 2-Wire RX/TX Kit with 1 FE PoE interface
The 2E10-110-KIT-A includes one 2E10-110-RX EPoC adapter, one 2E10-110-TX EPoC adapter and one bundled 65W@56VDC power adapter. The EPo2 (Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one EPo2 unit at each end of PoE IP device (PD) & Ethernet Switch port.
In addition to reuse 2-wire cable, the EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire 26AWG cable.
E59-602 Indoor 30W/60W/95W PoE bt GbE Extender Plus
The E59-602 is Gigabit PoE Extender is an ideal for indoor environments where two units of E59-602 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 500m from end to end. No power adapter required, E59-602 Gigabit PoE extender is powered by Bt/UPoE injector, middle-span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.
The E59-602 is built-in voltage booster guarantees stable voltage output for your high powered PoE devices.
TE10-110-KIT-A Indoor Ethernet & Power over UTP/STP RX/TX Kit with 1 FE PoE interface
The TE10-110-KIT-A includes one TE10-110-TX EPoT transmitter, one TE10-110-RX EPoT receiver and one 65W@56VDC power adapter.
The TE10-110-TX, a 1-to-1 EPoT (Ethernet & Power over UTP/STP Cable) transmitter(TX) equipped with 1 EPoT port & 1 RJ-45 PoE port, is designed to connect a remote PoE IP camera over single UTP/STP Cat.5e/6 cable without requiring extra power supply. This cutting-edge model delivers data and power at long range up to 1,200m for a PoE IP camera.
TE10-110-RX is an EPoT (Ethernet & Power over UTP/STP Cable) receiver(RX) equipped with 1 EPoT port & 1 LAN port. It is powered by 65W power adapter. This cutting-edge model is a long range PoE solution providing data & power to EPoT TX adapter and PoE IP camera over single UTP/STP cable up to 1,200m(3,937ft).
TE10-110-RX Indoor Ethernet & Power over UTP/STP Remote Adapter with 1 FE PoE interface
The TE10-110-RX is an EPoT (Ethernet & Power over UTP/STP Cable) receiver (RX) equipped with 1 EPoT port & 1 LAN port. It is powered by 65W power adapter.
This cutting-edge model is a long range PoE solution providing data & power to EPoT TX adapter and PoE IP camera over single UTP/STP cable up to 1,200m (3,937ft).
Key Features:
- One RJ45 EPoT port & one 10/100Mbps LAN port
- Extends PoE to Transmitter(TX) and PoE IP camera
- Including 65W@ 56VDC power adapter can insert PoE for non-PoE switch
- Long-range IP data & PoE over 4-pair/2-pair/1-pair UTP /STP caat.x cables
- Supports peer-to-peer, daisy-chain, and failover Ring topologies
- Eliminates the need for intermediate Ethernet switches & power supplies for long-range deployment
- Plug-and-Play connection
TE10-110-TX Indoor Ethernet & Power over UTP/STP Remote Extender with 1 FE PoE interface
The TE10-110-TX, a 1-to-1 EPoT (Ethernet & Power over UTP/STP Cable) transmitter(TX) equipped with 1 EPoT port & 1 RJ-45 PoE port, is designed to connect a remote PoE IP camera over single UTP/STP Cat.5e/6 cable without requiring extra power supply.
This cutting-edge model delivers data and power at long range up to 1,200m for a PoE IP camera.
Key Features:
- One RJ45 EPoT port & one 10/100Mbps LAN PoE PSE port
- Long-range IP data & PoE over 4-pair/2-pair/1-pair UTP /STP cat.5e/6 cables
- Delivers up to 9.7 watts@1,200m(3,937ft) for a PoE IP camera
- Supports peer-to-peer, daisy-chain, and failover Ring topologies
- Eliminates the need for intermediate Ethernet switches & power supplies for long-range deployment
- Plug-and-Play connection
- PoE Output On/Off control
TE22-110-TX Outdoor Ethernet & Power over UTP/STP Remote Extender with 1 FE PoE interface
The TE22-110-TX, a outdoor 1-to-1 EPoT (Ethernet & Power over UTP/STP Cable) transmitter (TX) adapter equipped with 1 EPoT port & 1 RJ-45 PoE port, is designed to connect a remote PoE IP camera over single UTP/STP Cable without requiring extra power supply. This cutting-edge model delivers data and power at long range up to 1,200m for a PoE IP camera.
Outdoor model supports built-in 6KV EPoT surge protection, IP67 rated, IK10 vandal proof, and operates under harsh weather conditions between -30°C ~ 60°C (-22°F ~ 140°F).
TE22-120-TX Outdoor Ethernet & Power over UTP/STP Remote Extender with 2 FE PoE interfaces
The XE22-120-TX, a 1-to-2 EPoT (Ethernet & Power over UTP/STP Cable) transmitter(TX) adapter equipped with 1 EPoT port & 2-port PoE switch, is designed to connect 2 of remote PoE IP cameras over single UTP/STP Cable without requiring extra power supply. This cutting-edge model delivers data and power at long range up to 500m with 25W PoE budget for 2 of PoE IP cameras remotely.
Outdoor model supports built-in 6KV EPoT surge protection, IP67 rated, IK10 vandal proof, and operates under harsh weather conditions between -30°C ~ 60°C (-22°F ~ 140°F).
Application Diagram
XC10-041-250 4 Channel 250W Ethernet & Power over Coax Switch for EPoC TX adapters with 1 RJ45 Uplink interface
The XC10-041-250 is a RX switch equipped with 4-ports BNC, 1-port Gigabit and the internal 250w power supply. The EPoC (Ethernet & Power over Coax) line is a long-reach solution providing data and PoE over RG6 coaxial cable up to 1200m (3937ft) for any brand of PoE IP camera. Besides long range PoE solution, this product line is also often used to upgrade legacy of CCTV to IP surveillance without changing existing RG59/RG6 coaxial cable. Furthermore, outdoor EPoC solution is a rugged and economical alternative to optical fiber, the power over coax to remote PoE IP camera is more convenient than optical fiber solution which often don’t carry power.
XC10-084-380 8 Channel 380W Ethernet & Power over Coax Switch for EPoC TX adapters with 2 RJ45 and 2 SFP Uplink interfaces
XC10-084-380 is an EPoC (Ethernet & Power over Coax) RX switch equipped with 8-ports EPoC, 2-port Gigabit LAN, 2-port Gigabit SFP, and the internal 380w power supply. This cutting-edge model is a long-reach PoE solution providing data & power over single coaxial cable up to 1,200m (3,937ft) for multi-brand of PoE IP camera. Besides long range PoE solution, XC10-084-380 is also often used to upgrade legacy of CCTV to IP surveillance without changing existing coaxial cable infrastructure.
XC10-164-750 16 Channel 750W Ethernet & Power over Coax Switch for TX adapters with 2 RJ45 and 2 SFP Uplink interfaces
XC10-164-750 is an EPoC (Ethernet & Power over Coax) RX switch equipped with 16-ports EPoC, 2-port Gigabit LAN , 2-port Gigabit SFP, and the internal 750w power supply. This cutting-edge model is a long-reach PoE solution providing data & power over single coaxial cable up to 1,200m (3,937ft) for multi-brand of PoE IP camera. Besides long range PoE solution,XC10-164-750 is also often used to upgrade legacy of CCTV to IP surveillance without changing existing coaxial cable infrastructure.
XE10-110-KIT-A Indoor Ethernet & Power over Coax RX/TX Kit with 1 FE PoE interface
The XE10-110-KIT-A includes one XE10-110-RX EPoC adapter, one XE10-110-TX EPoC adapter and one 65W@56VDC power adapter. EPoC (Ethernet & Power over Coax) line is a long-reach solution providing Fast Ethernet and PoE over RG6 coaxial cable up to 1,200m (3,937ft) for any brand of PoE IP camera. This product line also is often used to upgrade legacy of CCTV to IP surveillance without changing legacy RG59/RG6 coaxial cable. Furthermore, outdoor EPoC solution is a rugged and economical alternative to optical fiber. In addition, the power over coax to remote PoE IP camera is more convenient than optical fiber solution.
XE10-110-RX Indoor Ethernet & Power over Coax Source Extender with 1 FE PoE interface
EPoC (Ethernet & Power over Coax) line is a long-reach solution providing Fast Ethernet and PoE over RG6 coaxial cable up to 1200m (3937ft) for any brand of PoE IP camera. This product line also is often used to upgrade legacy of CCTV to IP surveillance without changing legacy RG59/RG6 coaxial cable. Furthermore, outdoor EPoC solution is a rugged and economical alternative to optical fiber. In addition, the power over coax to remote PoE IP camera is more convenient than optical fiber solution.
XE10-110-TX Indoor Ethernet & Power over Coax Remote Extender with 1 FE PoE interface
EPoC (Ethernet & Power over Coax) line is a long-reach solution providing Fast Ethernet and PoE over RG6 coaxial cable up to 1200m(3937ft) for any brand of PoE IP camera. This product line also is often used to upgrade legacy of CCTV to IP surveillance without changing legacy RG59/RG6 coaxial cable. Furthermore, outdoor EPoC solution is a rugged and economical alternative to optical fiber. In addition, the power over coax to remote PoE IP camera is more convenient than optical fiber solution.
XE12-120-TX Indoor Ethernet & Power over Coax Remote Extender with 2 FE PoE interfaces
EPoC (Ethernet & Power over Coax) line is a long-reach solution providing Fast Ethernet and PoE over RG6 coaxial cable up to 1200m (3937ft) for any brand of PoE IP camera. This product line also is often used to upgrade legacy of CCTV to IP surveillance without changing legacy RG59/RG6 coaxial cable. Furthermore, outdoor EPoC solution is a rugged and economical alternative to optical fiber. In addition, the power over coax to remote PoE IP camera is more convenient than optical fiber solution.
XE22-110-TX Outdoor Ethernet & Power over Coax Remote Extender with 1 FE PoE interface
EPoC (Ethernet & Power over Coax) line is a long-reach solution providing Fast Ethernet and PoE over RG6 coaxial cable up to 1200m (3937ft) for any brand of PoE IP camera. This product line also is often used to upgrade legacy of CCTV to IP surveillance without changing legacy RG59/RG6 coaxial cable. Furthermore, outdoor EPoC solution is a rugged and economical alternative to optical fiber. In addition, the power over coax to remote PoE IP camera is more convenient than optical fiber solution.
XE22-120-TX Outdoor Ethernet & Power over Coax Remote Extender with 2 FE PoE interfaces
EPoC (Ethernet & Power over Coax) line is a long-reach solution providing Fast Ethernet and PoE over RG6 coaxial cable up to 1200m (3,937ft) for any brand of PoE IP camera. This product line also is often used to upgrade legacy of CCTV to IP surveillance without changing legacy RG59/RG6 coaxial cable. Furthermore, outdoor EPoC solution is a rugged and economical alternative to optical fiber. In addition, the power over coax to remote PoE IP camera is more convenient than optical fiber solution.
XT10-041-250 4 Port 250W Ethernet & Power Extender over UTP/STP for EPoT TX adapter with 1 RJ45 Uplink
XT10-041-250 is an EPoT (Ethernet & Power over UTP/STP Cable) RX switch equipped with 4-ports EPoT, 1-port Gigabit LAN and the internal 250w power supply.
This cutting-edge model is a long-reach PoE solution providing data & power over single UTP/STP cable up to 1,200m (3,937ft) for multi-brand of PoE IP camera.
VX-160COAX Local Powered PoE Extender over Coaxial Kit | PoE over Coax
The VX-160COAX system can connect through an Ethernet extension with remote PoE ability utilizing a coaxial cable. This kit includes one master unit and one slave unit. The VX-160COAX master unit sends data and power to the slave unit through a coaxial cable. The master unit is powered by the local high power PoE Injector. The slave unit regenerates the power and offers PoE capability that powers a remote powered device. When powered by a 48V power adapter and a 100m Ethernet cable, this unit offers up to 15.4 watts to powered devices. The VX-160COAX system also includes a wall mount option.
The VX-160COAX master unit connects with the slave unit via a BNC connector and 5C2V cable, and up to 4,500ft distance with a coaxial cable when a 48V high power adaptor is utilized. Managers are able to select different data rates from the DIP switch on each unit for varying distances and gauges. In full-duplex mode, the maximum data rate is 60 Mbps, depending on the cable gauges.
This unit adheres to the Safety Extra Low Voltage (SELV) requirement. A VX-160COAX system provides a budget friendly solution for remote power applications such as LAN-to-LAN connection, Video Streaming, FTTB, and MDU/MTU over a single twisted line.
Features:
- Coaxial PoE Ethernet Extender for 10/100M Fast Ethernet interfaces
- Built-in BNC Connectors
- Distances of up to 4,500ft for 5C2V Coaxial cable
- Line rate up to 60 Mbps full duplex
- DIP Switches for line rate settings with Slave following Master
- Max. 15.4 watts for remote PD device
- IEEE 802.3af PoE Compliant
- Auto MDIX for 10/100 BaseT Ethernet LAN Ports
- Easy installation with indoor models
- Low-Latency for Video / Voice / Data applications
- PoE over Coax
