Switches
Versatek’s Ethernet Switches
Versa Technology offers a selection of switches including gigabit switches, 10/100 switches, and PoE switches. These state-of-the-art switches support a variety of networking applications. Our Power over Ethernet (PoE) switches deliver data and power via a standard Cat5/6 cable. These PoE-enabled switches simplify deployment of surveillance cameras, VoIP, and WAPs. With PoE, these network applications can be deployed at any location. Versa Technology’s switches are cost-effective and dependable units that connect devices on a computer network and use packet switching technology to deliver packets at intended destinations. Versa Technology also offers industrial-grade switches certified by CTC for heavy duty environments.
C11-042-30-065 6-Port 10/100 with 4PoE Ports and 2 EXPoE Ports (65W)
AETEK’s C11 indoor unmanaged EXPoE switch series, equipped with DIP switch, provides an EX “Extensive” operation mode. The C11 series is specially designed for IP Surveillance application as well as standard 802.3af/at PoE functions. The EX mode delivers extreme distances of camera images and powers a maximum of up to 250m via specific EX ports for long reach PoE IP cameras. The C11 series also features an extra 20% range of input voltage tolerance, lightning surge protection of AC power and PoE surge protection to prevent the damage caused by outside unstable AC power, lightning surge and power spike. These unique features reduce the costs to replace a damaged fault unit.
The C11 series has five sub models consisting of 6, 10, 18, and 26 ports with a range of power budgets from 65W to 380W for IP
surveillance.
Features:
- 2 of the 4 PoE ports can be adjusted as EX PoE mode
- Total power budget 65W
- 15.4W/30W 802.3af/802.3at compliant
- 4KV PoE surge protection each port
- 4KV AC surge protection
- 20% range of input voltage tolerance
- Circuit protection prevents power interference between ports
- Detects PoE PD (power device) automatically
- EX mode OFF reaches PoE camera up to 100m@100Mbps via any port
- EX mode ON reaches 802.3af camera up to 250m@10Mbps via EXPoE ports
- EX mode ON reaches 802.3at camera up to 200m@10Mbps via EXPoE ports
C11-082-32-120 8-Port 10/100 with 8 PoE Ports + 2 EXPoE Ports and 2 GbE Combo Ports (120W)
AETEK’s C11 indoor unmanaged EXPoE switch series, equipped with DIP switch, provides an EX “Extensive” operation mode. The C11 series is specially designed for IP Surveillance application as well as standard 802.3af/at PoE functions. The EX mode delivers extreme distances of camera images and powers a maximum of up to 250m via specific EX ports for long reach PoE IP cameras. The C11 series also features an extra 20% range of input voltage tolerance, lightning surge protection of AC power and PoE surge protection to prevent the damage caused by outside unstable AC power, lightning surge and power spike. These unique features reduce the costs to replace a damaged fault unit.
The C11 series has five sub models consisting of 6, 10, 18, and 26 ports with a range of power budgets from 65W to 380W for IP
surveillance.
Features:
- 15.4W / 802.3af & 30W / 802.3at compliant
- 6KV PoE surge protection each port
- 4KV AC surge protection
- Extra 20% range of input voltage tolerance
- Circuit protection prevents power interference between ports
- Detects PoE PD (power device) automatically
- EX mode OFF reaches PoE camera up to 100m@100Mbps via any PoE port
- EX mode ON reaches 802.3af camera up to 250m@10Mbps via EXPoE ports
- EX mode ON reaches 802.3at camera up to 200m@10Mbps via EXPoE ports
C11-162-31-250 16-Port 10/100 with 8 EXPoE Ports and 2 GbE Combo Ports (250W)
AETEK’s C11 indoor unmanaged EXPoE switch series, equipped with DIP switch, provides an EX “Extensive” operation mode. The C11 series is specially designed for IP Surveillance application as well as standard 802.3af/at PoE functions. The EX mode delivers extreme distances of camera images and powers a maximum of up to 250m via specific EX ports for long reach PoE IP cameras. The C11 series also features an extra 20% range of input voltage tolerance, lightning surge protection of AC power and PoE surge protection to prevent the damage caused by outside unstable AC power, lightning surge and power spike. These unique features reduce the costs to replace a damaged fault unit.
The C11 series has five sub models consisting of 6, 10, 18, and 26 ports with a range of power budgets from 65W to 380W for IP
surveillance.
Features:
- 8 of the 16 PoE ports can be adjusted as EX PoE mode
- Total Power budget 250W
- 15.4W/30W 802.3af/802.3at compliant
- 6KV PoE surge protection each port
- 4KV AC surge protection
- 20% range of input voltage tolerance
- Circuit protection prevents power interference between ports
- Detects PoE PD (power device) automatically
- EX mode OFF reaches PoE camera up to 100m@100Mbps via any port
- EX mode ON reaches 802.3af camera up to 250m@10Mbps via EXPoE ports
- EX mode ON reaches 802.3at camera up to 200m@10Mbps via EXPoE ports
C50-162-30-250 Managed ONVIF GbE Switch with 16 X 30W PoE and 2 SFP Interfaces
C50-162-30-250, a basic Layer 2 Smart PoE Switch, is equipped with 16-port Gigabit PoE (10M/100M/1G) and 2-port Gigabit (100M/1G) SFP transceiver slots for flexible link. With total power budget up to 250W, C50-162-30-250 is an optimum framework and solution forPoEIP device such as IP cameras and wireless APs complying ONVIF, UPnP or ARP protocol.
AETEK’s C50 series to ONVIF cameras will not only be a smart L2 PoE Gigabit switch, but also be the centralized IP surveillance controller. The functions of IP surveillance controller incorporate multi-brand ONVIF IP surveillance products including camera, NVR, and video server to configure and manage over a single IP network. The unique benefits by dedicated TAB & GUI generate IP surveillance topology automatically once ONIF cameras are connected to C50 smart L2 PoE switch.
Installers can easily catch comprehensive individual ONVIF camera information including camera list, IP/MAC address, topology, power consumption, and traffic monitoring via web browser. Furthermore, an intuitive web GUI leads installer to group VLAN across switches, reboot camera, and diagnose cable via graphic topology. C50 series is the innovative SmartL2 PoE switch that brings the ONVIF cameras to benefit of simplified management, reduced complexity, lowered cost for IP surveillance deployments.
C50-242-30-370 Managed ONVIF GbE Switch with 24 X 30W PoE and 2 SFP Interfaces
C50-242-30-370, a basic Layer 2 Smart PoE Switch, is equipped with 24-port Gigabit PoE (10M/100M/1G) and 2-port Gigabit (100M/1G) SFP transceiver slots for flexible link. With total power budget up to 370W, C50-242-30-370 is an optimum framework and solution forPoEIP device such as IP cameras and wireless APs complying ONVIF, UPnP or ARP protocol.
AETEK’s C50 series to ONVIF cameras will not only be a smart L2 PoEGigabit switch, but also be the centralized IP surveillance controller. The functions of IP surveillance controller incorporate multi-brand ONVIF IP surveillance products including camera, NVR, and video server to configure and manage over a single IP network. The unique benefits by dedicated TAB & GUI generate IP surveillance topology automatically once ONIF cameras are connected to C50 smart L2 PoE switch.
Installers can easily catch comprehensive individual ONVIF camera information including camera list, IP/MAC address, topology, power consumption, and traffic monitoring via web browser. Furthermore, an intuitive web GUI leads installer to group VLAN across switches, reboot camera, and diagnose cable via graphic topology. C50 series is the innovative SmartL2 PoE switch that brings the ONVIF cameras to benefit of simplified management, reduced complexity, lowered cost for IP surveillance deployments.
C51-164-30-250 Managed 16-Port 10/100/1000 PoE Switch with 2 GbE and 2 SFP Ports (250W)
The C51 series from AETEK offers a broad range of L2 Smart PoE Switches, equipped with multi-port Gigabit PoE (10M/100M/1G) and SFP transceiver (1G) slots for flexible link. The C51 series has three sub-models including 8 ports, 16 ports, and 24 ports complying with IEEE 802.3af/at standards with sufficient PoE power budget for any application.
Features:
- Layer 2 Switch
- 802.1d (STP), 802.1w (RSTP), 802.1s (MSTP)
- Loop protection
- LACP
- QoS
- VLAN
- Ethernet cable length measurement
- DHCP Server
- Flexible SFP transceiver ports for uplink
- 15.4W/30W per port IEEE802.3af/at compliant
- Supports 10/100/1000Mbps data rates
- Support Auto-MDI/MDIX
- Built-in 12KV surge protection for each PoE port
- IEEE 802.3az Energy Efficient Ethernet standard for green power
- 19″ Rackmount installation
C51-244-30-370 Managed 24-Port 10/100/1000 PoE Switch with 2 GbE and 2 SFP Ports (370W)
The C51 series from AETEK offers a broad range of L2 Smart PoE Switches, equipped with multi-port Gigabit PoE (10M/100M/1G) and SFP transceiver (1G) slots for flexible link. The C51 series has three sub-models including 8 ports, 16 ports, and 24 ports complying with IEEE 802.3af/at standards with sufficient PoE power budget for any application.
Features:
- Layer 2 Switch
- 802.1d (STP), 802.1w (RSTP), 802.1s (MSTP)
- Loop protection
- LACP
- QoS
- VLAN
- Ethernet cable length measurement
- DHCP Server
- Flexible SFP transceiver ports for uplink
- 15.4W/30W per port IEEE802.3af/at compliant
- Supports 10/100/1000Mbps data rates
- Support Auto-MDI/MDIX
- Built-in 12KV surge protection for each PoE port
- IEEE 802.3az Energy Efficient Ethernet standard for green power
- 19″ Rackmount installation
H36-044-90 Industrial Gigabit 30W/60W/95W PoE Switch W/ 12~56VDC Input
The H36-044-90 is an Industrial Gigabit PoE Switch that is designed with IP30, 12KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C during harsh weather conditions. They enable indoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other industrial applications. The H36-044-90 provide 4-port Gigabit 95W PoE with 2 port Gigabit RJ45 and 2 port Gigabit SFP transceiver slots for flexible uplink.
The H36-044-90 as easy-to-install power source equipment (PSE) and provide power up to 95W per port.
H40-044-30-150 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 2 RJ45 and 2 SFP interfaces
The H40-044-30-150 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.
With a total PoE power budget up to 150 watts, the H40-044-30-150 meets the demand of PoE power for any HD IP surveillance applications. It enables the outdoor connection of PoE power devices (PDs) to the network, including outdoor PoE IP cameras, PoE wireless access points (APs), and other industrial applications.
The H40 series of Industrial Unmanaged PoE Switches supports IP67, 6KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65 °C.
The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.
H40-044-60-250 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 60W PoE + 2 RJ45 and 2 SFP interfaces
The H40-044-60-250 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 60-watt UPoE. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.
With a total PoE power budget up to 250 watts, the H40-044-60-250 meets the demand of high-power PoE for IP surveillance applications such as outdoor PTZ Speed Dome camera, License Plate Recognition(LPR) camera with high- power illuminator, and outdoor camera supporting cold start function.
The H40 series of Industrial Unmanaged PoE Switches supports IP67, 6KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65°C.
The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.
H40-044-90-250 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 95W PoE + 2 RJ45 and 2 SFP interfaces
The H40-044-90-250 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 95-watt PoE. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.
With a total PoE power budget up to 250 watts, the H40-044-90-250 meets the demand of PoE power for any HD IP surveillance applications. It enables the outdoor connection of PoE power devices (PDs) to the network, including outdoor PoE IP cameras, PoE wireless access points (APs), and other industrial applications.
The H40 series of Industrial Unmanaged PoE Switches supports IP67, 12KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65°C.
The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.
H40-082-30-250 Unmanaged Industrial Outdoor PoE Switch with 8 x 30W PoE and 2 SFP interfaces
H40-082-30-250 Unmanaged Industrial Outdoor PoE Switch with 8 x 30W PoE and 2 SFP interfaces
The H40-082-30-250 is a Gigabit PoE solution for the outdoor environment and offers eight of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit SFP fiber slots for uplink.
With a total PoE power budget up to 250 watts, the H40-082-30-250 meets the demand of PoE power for any HD IP surveillance applications. It enables the outdoor connection of PoE power devices(PDs) to the network, including outdoor PoE IP cameras, PoE wireless access points (APs), and other industrial applications.
The H40 series of Industrial Unmanaged PoE Switches supports IP67, 6KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65 °C.
The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.
H42-042-30-075 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 1 selectable 24/56VDC PoE and 1 SFP interface
The H42-042-30-075 is Industrial Gigabit Adjustable PoE Switch designed with IP67 & IK10, 6KV PoE Ethernet port surge protection, 10KV surge protection in AC power, and operation temperature between -40°C and 65°C during harsh weather conditions. They enable outdoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other industrial applications. The H42-042-40-075 provides 4 ports Gigabit PoE with 1 port Gigabit adjustable 24VDC or 56VDC PoE as well as additional SFP transceiver slots for flexible uplink.
The H42-042-30-075 as easy-to-install power source equipment (PSE) and provide power up to 30W per port.
H70-044-60 Managed Industrial IP30 PoE Switch With 4 X 60W PoE + 2 RJ45 And 2 SFP Interfaces
H70-044-60 Managed Industrial IP30 PoE Switch With 4 X 60W PoE + 2 RJ45 And 2 SFP Interfaces
The H70-044-60 Switch, a 4-Port 60W UPoE + 2-port RJ45 + 2-port SFP Industrial L2 plus Gigabit switch is designed with 6KV Ethernet port surge protection and industrial grade standard to operate between -40°C and 75°C for harsh weather conditions. They enable outdoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other outdoor industrial applications.
Besides Layer 2 plus managed PoE Gigabit switch features, H70-044-60 is also an IP camera controller to be easy overview & management for IP cameras complying with ONVIF even installers are not familiar with advanced features of Layer 2 plus managed PoE switch. A centralized GUI (Graphic User Interface) makes it easy to find ONVIF cameras and generate topology automatically once IP cameras are connected to H70-044-60.
Besides general functions of L2 plus & basic L3 switch such as static route, QoS, security, spanning tree, cable length measurement, and SNMP v1/v2c/v3, a dedicated web graphic user interface of IP surveillance is easy to configure and manage IP device. It automatically generates network topology maps enabling VLAN group, cable diagnostic, and PoE management.
H80-044-30-150 Managed Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 2 RJ45 and 2 SFP interfaces
The H80-044-30-150 PoECam Switch, a 4-Port 30W PoE + 2-port RJ45 + 2-port SFP L2 plus Gigabit switch, is designed with IP67, 6KV PoE Ethernet surge protection, and 40KV surge protection in power. It enables connection for outdoor PoE PDs such as IP Cameras & wireless APs to operate between -40℃ ~ 65℃ during harsh weather conditions.
Besides Layer 2 plus managed PoE Gigabit switch features, H80-044-30-150 is also an IP camera controller to be easy overview & management for IP cameras complying with ONVIF even installers are not familiar with advanced features of Layer 2 plus managed PoE switch. A centralized GUI (Graphic User Interface) makes it easy to find ONVIF cameras and generate topology automatically once IP cameras are connected to H80-044-30-150.
In addition, installers can easily catch comprehensive individual ONVIF camera information including camera list, IP/MAC address, topology, power consumption, PoE, and traffic monitoring thru Web browser. Furthermore, an intuitive web GUI leads installer to group VLAN across switches, diagnose cable, and reboot camera thru graphic topology. H80-044-30-150 bringing the ONVIF cameras benefit of simplified management, reduced complexity, lower cost for IP surveillance deployments.
C70 series, a Master PoECam L2 plus managed switch, must be installed within indoor control center in order to optimize comprehensive H80-044-30-150 features.
H80-044-60-250 Managed Industrial Outdoor Gigabit PoE Switch with 4 x 60W PoE + 2 RJ45 and 2 SFP interface
The H80-044-60-250 PoECam Switch, a 4-Port 60W PoE + 2-port RJ45 + 2-port SFP L2 plus Gigabit switch, is designed with IP67, 6KV PoE Ethernet surge protection, and 40KV surge protection in power. It enables connection for outdoor PoE PDs such as IP Cameras & wireless APs to operate between-40℃ ~ 60℃ during harsh weather conditions.
Besides Layer 2 plus managed PoE Gigabit switch features, H80-044-60-250 is also an IP camera controller to be easy overview & management for IP cameras complying with ONVIF even installers are not familiar with advanced features of Layer 2 plus managed PoE switch. A centralized GUI (Graphic User Interface) makes it easy to find ONVIF cameras and generate topology automatically once IP cameras are connected to H80-044-60-250.
In addition, installers can easily catch comprehensive individual ONVIF camera information including camera list, IP/MAC address, topology, power consumption, PoE, and traffic monitoring thru Web browser. Furthermore, an intuitive web GUI leads installer to group VLAN across switches, diagnose cable, and reboot camera thru graphic topology. H80-044-60-250 bringing the ONVIF cameras benefit of simplified management, reduced complexity, lower cost for IP surveillance deployments.
C70 series, a Master PoECam L2 plus managed switch, must be installed within indoor control center in order to optimize comprehensive H80-044-60-250 features.
VX-GPH8245 5-Port Gigabit Ethernet Smart-Managed Switch with 4 PoE+ Ports
5-Port PoE Switch
The Versa Technology VX-GPH8245 is a 5-port gigabit ethernet smart-lite switch with 4 PoE+ ports. With a total of 5 backwards-compatible gigabit ports, you can integrate computers, printers, access points, etc. in your network reliably. The VX-GPH8245 can also supply power to PoE-enabled devices via its 4 PoE ports (IEEE 802.3af). This eliminates the need for an additional power cable. To ensure silent operation in the workplace, the VX-GPH8245 is equipped with a fanless design. The switch is “smart managed” for optimal usage and comfort. This allows configurable VLAN and QoS, among other things.
Features:
- 5-Port 10/100/1000Mbit/s Gigabit Ethernet Switch
- 4-Port PoE, follow IEEE 802.3at and IEEE 802.3af standard
- PoE Budget ca. 70W for a max. of 4 devices, supports a max. of 30W per port IEEE 802.3at
- Easy Smart-Managed
- Web UI for configuration
- PoE On/Off control
- Fanless Design
VX-GPU2610-9 L2+ 8-Port 10/100/1000TX 90W 802.3bt PoE + 2-Port 100/1000X SFP Managed Switch (740W PoE budget, DMS)
The VX-GPU2610-9 from Versa Technology is an L2+ Managed POE++ Switch offering better PoE functionality and usability. The VX-GPU2610-9 includes advanced L3 features such as Static Route that delivers better cost performance and lower total cost of ownership in Enterprise networks. It also supports Universal Power Over Ethernet (UPOE), ports 1 to 8, with a per port max. wattage of 90W and a total PoE output power of up to 740W.
The VX-GPU2610-9 delivers 8 (10M/100M/1G) RJ45 with shared UPOE ports, 2 Combo GbE RJ45/SFP ports and RJ45 Console port. The VX-GPU2610-9 provides high HW performance and environment flexibility for SMBs and Enterprises.
Versa’s VX-GPU2610-9 is ideal for delivering management simplicity, intuitive user experience, and lower total cost of ownership. The embedded Device Managed System is designed to be extremely easy-to-use, manage and install; IP phones, IP cameras, high power wireless APs or LED lighting for enterprise applications.
Feature-Rich Ethernet Switch for Enterprise-Class
The switch delivers advanced functionality in L2+ managed switch including Layer 3 static route, DHCP server, IPv6 support, LLDP, etc. It also has comprehensive security features such as IP source guard and ACL to guard your network from unauthorized access. It helps users to build on the market-leading price/performance with L2+ Managed GbE PoE switch, and provide secure, reliable and ease of use for enterprise/SMB deployments.
Easy to Install, Configure and Troubleshoot Through the Device Management System (DMS)
The DMS provides embedded functions to facilitate devices management at anytime and anywhere. Its user-friendly interface helps users to manage devices intuitively. It supports various IP device types (e.g. IP-phone, IP-camera, WiFi-AP) for end users to enhance manageability and save time/cost during installation/maintenance stages.
Lower Total Cost of Ownership (TCO) with Energy-efficient Design
The unit is designed to help customers to reduce power consumption and lower the TCO with IEEE’s 802.3az Energy Efficient Ethernet features. It can be used to build a green Ethernet networking environment.
Universal Power over Ethernet Design
Universal Power Over Ethernet (UPOE), which extends the IEEE Power over Ethernet Plus (PoE+) standard to double the power per port to 90 watts, options to power IP devices with power-saving features like Power scheduling and PoE configuration.
Features:
- L2+ Managed features provide easier manageability, robust security and QoS.
- Built in Device Management System (DMS)
- DHCP Server
- IPv4/IPv6 Management
- PoE Port configuration and scheduling
- IEEE 802.3af/at/bt POE++ standard, also UPOE
- IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet
VX-GPU2626 (V2) L2+ 24-Port Managed GbE UPOE Switch (2000W)
The VX-GPU2626 (V2), from Versa Technology, is a L2+ Managed UPOE Switch which offers a full suite of L2 features, better PoE functionality and usability, including advanced L3 features such as Static Route that delivers better cost performance and lower total cost of ownership in Enterprise networks via fiber or copper connections. It also supports Universal Power Over Ethernet (UPOE), with 60 Watts per port.
The VX-GPU2626 (V2) delivers 24 (10M/100M/1G) RJ45/PoE+/UPOE (supports 802.3at/af, and total of 2000W) ports, 2 Combo GbE RJ45/SFP ports and RJ45 Console port. The unit includes two 1000W power supply units with the option of purchasing an additional power supply unit to use as a backup power supply. The unit provides high HW performance and environment flexibility for SMBs and Enterprises. The switch is ideal for delivering management simplicity, intuitive user experience, and lower total cost of ownership. The embedded Device Managed System is designed to be extremely easy-to-use, manage and install; IP phones, IP cameras, high power wireless APs or LED lighting for enterprise applications.
Feature-Rich Ethernet Switch for Enterprise-Class
The switch delivers advanced functionality in L2+ managed switch including Layer 3 static route, DHCP server, IPv6 support, LLDP, etc. It also has comprehensive security features such as IP source guard and ACL to guard your network from unauthorized access. It helps users to build on the market-leading price/performance with L2+ Managed GbE PoE switch, and provide secure, reliable and ease of use for enterprise/SMB deployments.
Easy to Install, Configure and Troubleshoot Through the Device Management System (DMS)
The DMS provides embedded functions to facilitate devices management at anytime and anywhere. Its user-friendly interface helps users to manage devices intuitively. It supports various IP device types (e.g. IP-phone, IP-camera, WiFi-AP) for end users to enhance manageability and save time/cost during installation/maintenance stages.
Lower Total Cost of Ownership (TCO) with Energy-efficient Design
The unit is designed to help customers to reduce power consumption and lower the TCO with IEEE’s 802.3az Energy Efficient Ethernet features.
Universal Power over Ethernet Design
Universal Power Over Ethernet (UPOE), which extends the IEEE Power over Ethernet Plus (PoE+) standard to double the power per port to 60 watts, options to power IP devices with power-saving features like Power scheduling and PoE configuration.
Features:
- L2+ Managed features provide easier manageability, robust security and QoS.
- Built in Device Management System (DMS)
- DHCP Server
- IPv4/IPv6 Management
- PoE Port configuration and scheduling
- Dual hot-swappable 2000W power supply
- Support Universal Power over Ethernet (UPOE), 60W, standard
- IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet
VX-IGPU-2708A Industrial L2+ Managed GbE UPOE Switch with 6-Port 10/100/1000TX Shared 4 UPoE + 2 100/1000 SFP
The VX-IGPU-2708A from Versa Technology is an industrial L2+ managed GbE UPoE switch offering powerful L2 and basic L3 features with better functionality and usability. In addition to the extensive management features, the VX-IGPU-2708A also provides carrier Ethernet features such as OAM/ CFM/ ERPS/ EPS/ PTPv2, of which makes it suitable for industrial and carrier Ethernet applications.
The VX-IGPU-2708A features 6 (10M/100M/1G) RJ45 ports with 4 UPoE ports (supports 802.3 at/af/UPoE and total of up to 240W), 2 GbE SFP ports and 1 RJ45 console port. The VX-IGPU-2708A also provides high hardware performance.
The embedded Device Managed System (DMS) feature allows users to easily configure, install and troubleshoot their video surveillance systems, wireless access points, and other industrial applications. The VX-IGPU-2708A is the ideal switch to deliver simple management, better user experiences, and the lowest total cost of ownership.
Features:
- Rapid Ring (R-Ring)
- Built in Device Management System (DMS)
- iPush APP for real time alarm notification
- ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
- ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
- IEEE 1588v2 PTP
- IEEE 802.3ah OAM
- IEEE 802.1ag CFM (ITU-T Y.1731 Performance monitoring)
- DHCP Server
- IEEE 802.3az Energy Efficient Ethernet standard for green Ethernet application
- IEEE 802.3af/at/UPoE Power over Ethernet
- IPv4/IPv6 L3 static route
- EtherNet/IP (by request)
- PROFINET (by request)
VX-IGP-1204F 12-Port Managed Industrial Switch with 8 IEEE 802.3at PoE Ports
Versa Technology’s VX-IGP-1204F Managed Gigabit Ethernet switch provides 8 10/100/1000BaseT PoE PSE ports and 4 100/1000Base SFP ports. The unit complies with the IEEE 802.3at standard and is able to deliver up to 30 watts of power per port along with data on standard Ethernet cabling. The VX-IGP-1204F can be used to power any IEEE 802.3af/at compliant PoE PD device with the PoE power management feature. This will ease the deployment effort of planning PoE power budget and eliminates the need for additional wiring to reach a power source.
Features:
- Provides 8 10/100/1000Base TX PoE ports, plus 4 100FX/1000BaseF SFP slots
- IEEE 802.3af 15.4W / IEEE 802.3at 30W (2-pairs) High Power PoE
- Total PoE power budget: Max. 240W PSE power delivered
- 9K Jumbo frames
- L2 wire-speed switching engine
- 8K MAC forwarding addresses
- Network redundant LACP, Spanning tree STP, RSTP & MSTP, and quick Ring fail-over protection (< 20ms)
- Port-based / tag-based VLAN, IEEE 802.1ad / QinQ VLAN, add / remove VLAN tags
- Multicasting supports IGMP v1/v2, proxy & snooping
- Multicast / Broadcast / Flooding Storm Control
- IEEE 802.1x access control
- Per VLAN mirroring
- CLI / Web / SNMP management interfaces
- PoE PSE power management & PD power consumption monitoring
- Dual power input & reverse power protection
- DIN-Rail and wall mounting option
H30-044-30 Unmanaged Industrial PoE Switch With 4 X 30W PoE + 2 RJ45 And 2 SFP Interfaces
The H30-044-30 is a Gigabit PoE solution for the Industrial environment and offers four of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.
With a total PoE power budget up to 120 watts, the H30-044-30 meets the demand of PoE power for any HD IP surveillance applications. It enables the connection of PoE power devices(PDs) to the network, including PoE IP cameras, PoE wireless access points (APs), and other industrial applications.
The H30 series of Industrial Unmanaged PoE Switches supports 6KV surge protection for each Ethernet port and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 75°C.
VX-GPU2610 L2+ 4-Port 802.3bt PoE + 4-Port 10/100/1000TX + 2-Port 100/1000X SFP Managed GbE UPOE Switch (240W, DMS)
The VX-GPU2610, from Versa Technology, is a L2+ Managed UPOE Switch that offers a full suite of L2 features and better PoE functionality and usability. This includes advanced L3 features such as Static Route that delivers better cost performance and lower total cost of ownership in Enterprise networks via fiber or copper connections. It also supports Universal Power Over Ethernet (UPOE), per port 60W.
The VX-GPU2610 delivers 4 (10M/100M/1G) RJ45, 4 PoE+/UPOE (Supports 802.3at/af, and up to 240W) ports, 2 Combo GbE RJ45/SFP ports and RJ45 Console port. The VX-GPU2610 provides high HW performance and environment flexibility for SMBs and Enterprises.
Versa’s VX-GPU2610 is ideal for delivering management simplicity, intuitive user experience, and lower total cost of ownership. The embedded Device Managed System is designed to be extremely easy-to-use, manage and install; IP phones, IP cameras, high power wireless APs or LED lighting for enterprise applications.
Feature-Rich Ethernet Switch for Enterprise-Class
The switch delivers advanced functionality in L2+ managed switch including Layer 3 static route, DHCP server, IPv6 support, LLDP, etc. It also has comprehensive security features such as IP source guard and ACL to guard your network from unauthorized access. It helps users to build on the market-leading price/performance with L2+ Managed GbE PoE switch, and provide secure, reliable and ease of use for enterprise/SMB deployments.
Easy to Install, Configure and Troubleshoot Through the Device Management System (DMS)
The DMS provides embedded functions to facilitate devices management at anytime and anywhere. Its user-friendly interface helps users to manage devices intuitively. It supports various IP device types (e.g. IP-phone, IP-camera, WiFi-AP) for end users to enhance manageability and save time/cost during installation/ maintenance stages.
Lower Total Cost of Ownership (TCO) with Energy-efficient Design
The unit is designed to help customers to reduce power consumption and lower the TCO with IEEE’s 802.3az Energy Efficient Ethernet features.
Universal Power over Ethernet Design
Universal Power Over Ethernet (UPOE), which extends the IEEE Power over Ethernet Plus (PoE+) standard to double the power per port to 60 watts, options to power IP devices with power-saving features like Power scheduling and PoE configuration.
Key Features
- L2+ Managed features provide easier manageability, robust security and QoS.
- Built in Device Management System (DMS)
- DHCP Server
- IPv4/IPv6 Management
- PoE Port configuration and scheduling
- Dual hot-swappable 1440W power supply
- Support Universal Power over Ethernet (UPOE), 60W, standard
- IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet
H30-044-90 Unmanaged Industrial PoE Switch with 4 X 95W PoE + 2 RJ45 and 2 SFP Interfaces
The H30-044-90 is a Gigabit PoE solution for the Industrial environment and offers four of 10/100/1000BASE-T ports featuring 60W/95W UPoE. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.
With a total PoE power budget up to 240 watts, the H30-044-90 meets the demand of PoE power for any HD IP surveillance applications. It enables the connection of PoE power devices(PDs) to the network, including PoE IP cameras, PoE wireless access points (APs), and other industrial applications.
The H30 series of Industrial Unmanaged PoE Switches supports 6KV surge protection for each Ethernet port and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 75°C.
VX-GPF1626 24-Port GbE RJ45 + 2-Port GbE RJ45/SFP Web Smart+ GbE Managed PoE+ Switch
The VX-GPF1626 is a Web Smart+ Managed PoE+ Switch offering powerful L2 features, Layer 3 Static Routing, and reliable PoE functionality. The unit transports Ethernet services via fiber or copper connections. The VX-GPF1626 is equipped with 24 (10/100/1000) RJ45/PoE+ interfaces that support 802.3at/af devices and boasts a total PoE budget of 370W. The unit also features 2 Combo GbE RJ45/SFP ports. The VX-GPF1626 provides high HW performance ideal for SMBs and Enterprises. The VX-GPF1626 offers an intuitive management interface that makes it simple for new users to learn how to manage the unit.
Key Features:
- Web Smart+ features provide easier manageability, basic security and QoS
- Built in Device Management System (DMS)
- DHCP Server
- IPv4/IPv6 L3 static route
- PoE Port configuration and scheduling
- 802.3at high power PoE plus standard
- IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet
H30-082-30 Unmanaged Industrial PoE Switch with 8 X 30W PoE + 2 RJ45 and 2 SFP Interfaces
The H30-082-30 is a Gigabit PoE solution for the Industrial environment and offers eight of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.
With a total PoE power budget up to 240 watts, the H30-082-30 meets the demand of PoE power for any HD IP surveillance applications. It enables the connection of PoE power devices(PDs) to the network, including PoE IP cameras, PoE wireless access points (APs), and other industrial applications.
The H30 series of Industrial Unmanaged PoE Switches supports 6KV surge protection for each Ethernet port and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 75°C.
VX-GPH1610 8-Port 10/100/1000 RJ45/PoE+ with 2 Combo GbE RJ45/SFP Web Smart+ GbE Managed PoE+ Switch
VX-GPH1610 8-Port 10/100/1000 RJ45/PoE+ with 2 Combo GbE RJ45/SFP Web Smart+ GbE Managed PoE+ Switch
The VX-GPH1610 is a Web Smart+ Managed PoE+ Switch that offers powerful L2 features, Layer 3 Static Routing, and reliable PoE functionality. The unit transmits Ethernet services via fiber or copper connections.
The VX-GPH1610 features 8 (10M/100M/1G) RJ45/PoE+ (Support 802.3at/af, and total up to 250W) ports and 2 Combo GbE RJ45/SFP ports. The VX-GPH1610 provides high HW performance and is ideal for SMBs and Enterprises. The VX-GPH1610 offers simple management features lowering lowers the total cost of ownership.
Key Features:
- Web Smart+ features provide simple management, basic security and QoS
- Built in Device Management System (DMS)
- DHCP Server
- IPv4/IPv6 L3 static route
- PoE Port configuration and scheduling
- 802.3at high power PoE+ standard
- IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet
H32-042-30 IP30 Industrial Gigabit PoE Switch with 4 X 30W PoE + 1 Selectable 24/56VDC PoE and 1 SFP Interface
The H32-042-30 is an Industrial Grade Gigabit Selectable PoE Switch is designed with IP30, 6KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C during harsh weather conditions. It enables indoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other industrial applications. The H32-042-30 provides 4-port Gigabit PoE with 1 port Gigabit adjustable 24VDC or 56VDC PoE as well as additional SFP transceiver slots for flexible uplink.
The H32-042-30 as easy-to-install power source equipment (PSE) and provide power up to 30W per port.
H36-042-30 Unmanaged Industrial PoE Switch with 4 X 30W PoE + 1 RJ45 and 1 SFP Interface
The H36-042-30 is an Industrial Gigabit Adjustable PoE Switch that is designed with IP30, 6KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C during harsh weather conditions. They enable indoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other industrial applications. The H36-042-30 provide 4-port Gigabit PoE with 1 port Gigabit adjustable 12VDC or 56VDC PoE as well as additional SFP transceiver slots for flexible uplink.
The H36-042-30 as easy-to-install power source equipment (PSE) and provide power up to 30W per port.
