Showing all 5 results
Filter by price
Versa Technology offers the VX-Pi100 802.3af Power over Ethernet (PoE) Injector that operates with all access points that are 802.3af PoE Compatible. The VX-Pi100 is self-contained with both a Power over Ethernet PoE Injector Adapter and a power supply. The VX-Pi100 also has 100/240VAC support and supplies 48VDC to all units for PoE. The VX-PI100 PoE injector supports up to 48 volts and .5 Amps for a total of 24 Watts. This PoE Injector can be used with VoIP Phones, IP Cameras, Access Points, Media Devices and many other PoE Compliant devices.
The Versa Technology VX-Pi100 Poe Injector Adapter injects power over pairs 4, 5, 7 and 8. This unit can be used with all Cisco 802.3af POE Compatible devices, including Cisco IP Phones and Cisco Wireless Access Points. This Midspan POE Injector also provides Auto Recovery and Short Circuit prevention from over-voltage.
The VX-Pi100x Series Power over Ethernet (PoE) Midspan product category offers an affordable and fully IEEE 802.3af compatible solution that allows for the upgrading of existing solutions using PoE.
Midspan Power over Ethernet Injector VX-Pi100x Series allows IP telephones, wireless LAN access points, security network cameras and IP terminals to receive power and data over standard Ethernet cables, leaving a network infrastructure completely unaltered.
PoE simultaneously relays data and power smoothly and securely over a single LAN cable with no interference. A PoE injector resides between the Ethernet switch and the data terminals and delivers data and power from switches to powered devices. It is a highly effective means to inject power into existing LAN cables. VX-Pi100x series POE Power Supplies are fully compatible with the IEEE 802.3af PoE definition standard and provides a minimum of 15.4 Watts of power through each port to ensure safe operation of any standard PoE data terminal.
Our most popular power over Ethernet injector networking device is now available with bulk pricing. Order 20 or more to receive steep discounts.
- 24 Watts
- Cispr 22’B’, Vcci’B’, Fcc’B’ Compliance
- Light Weight: 145g
- Efficiency Over 75%
- Over-Voltage Protective Installation
- Short-circuit Protective Installation
- Protection Type: Auto-Recover
- Operating Temperature -10°~50°C
- UL and C-Tick Certified
The VX-Pi148G from Versa Technology is a dependable Power Over Ethernet Passive Injector. The unit is IEEE 802.3af compatible and supplies 48VDC powerover Ethernet cables. The VX-Pi148G IEEE 802.3af Power Over Ethernet Injector sends DC Voltage through a Cat.5 cable and allows the cable connected to the injector (VX-Pi148G) and the device to simultaneously transfer at the same time. The maximum distance between the injector (VX-Pi148G) and the end device is 100 meters. The VX-Pi148G Power Over Ethernet Passive Injector sends power over pairs 4, 5 and 7, 8. Data Pins are 1, 2 and 3, 6.
- 24 Watts
- Light Weight
- Dimensions: 74 x 54 x 25mm
- 802.3af compatible
- DC jack Pin size: 2.1 mm (0.083 in)
The VX-Pi148 is a 802.3af compatible 10/100M Power Over Ethernet PoE Passive Injector Adapter from Versa Technology. This stable unit operates with all 802.3af compliant access points. The VX-Pi148 offers 18~48 VDC support and supplies 48VDC power to all units. The Versa Technology VX-Pi148 Power Over Ethernet PoE Passive Injector Adapter injects power over pins 4, 5 and 7, 8. The data pins are 1, 2 and 3, 6.
- 24 Watts
- Light Weight
- Dimensions: 74x54x25mm
- DC Jack Pin Size: 2.1 mm (0.083 in)
Extend the Range of PoE and Data
The VX-Pi1000EX from Versa Technology is a quality unit that lengthens the range of Gigabit Ethernet Data and overrides the Poe Standard’s limit of 100m (328 ft.). This unit utilizes a CAT5e/6 UTP cable to 200m, 300m or longer.
PoE networking devices are utilized because of their simple installation process and additional deployment, but UTP cable specifications limit their range to 100 meters. The VX-Pi1000EX unit was created to extend the range of Gigabit PoE powered devices. With its simple plug-and-play instalation, the unit acts as a unit that simultaneously relays data and power and lengthens the range to 200m. These units can also be daisy-chained to triple or even quadruple the range of a PoE network , allowing for even greater versatility.
This unit is a great choice for school campuses or service providers to deploy wireless access points, IP surveillance cameras or IP phones. This unit allows for a cost effective central management of power.
Simple Cable Installation
The VX-Pi1000EX Gigabit PoE Extender unit features a simple plug and play installation. This unit is utilized between a powered device and power source equipment. The unit is an affordable solution that increase the standard PoE range from 100 meters to 200 meters. This unit features 2 RJ-45 ports included on the Gigabit extender. The IN port operates as the “PoE (Data and Power) input” while the other port operates as “PoE (Data and Power) output”. The PoE OUT port also doubles as a power injector to send DC voltage through a Cat5e/6 cable to simultaneously transmit power and data between the powered device and the power source equipment.
Long Distance PoE Wireless Access Point
When being used in Wireless LAN implementations, The VX-Pi10000EX allows for the connection of Wireless Access Points via a standard Cat5e/6 cable from over 100 meters from the Power Source Equipment (PSE). The unit can also be powered by PoE from the Ethernet cable without an external power feed. The VX-Pi1000EX removes the need for specific power outlets and reduces the need to supply extra cabling and wiring in places that are difficult to reach.
- IEEE 802.3af Compatible Gigabit Power over Ethernet
- Extends the range of PoE an additional 100 meters (328ft.)
- Forwards both Ethernet data and PoE power to remote devices
- Automatically detects and protects PoE equipments from being damaged by incorrect installation
- Multiple units can be daisy-chained for further extension
- No external power cable required for installation
- Compact size, Wall-Mountable design
- FOR INDOOR USE ONLY
The VX-160COAX system can connect through an Ethernet extension with remote PoE ability utilizing a coaxial cable. This kit includes one master unit and one slave unit. The VX-160COAX master unit sends data and power to the slave unit through a coaxial cable. The master unit is powered by the local high power PoE Injector. The slave unit regenerates the power and offers PoE capability that powers a remote powered device. When powered by a 48V power adapter and a 100m Ethernet cable, this unit offers up to 15.4 watts to powered devices. The VX-160COAX system also includes a wall mount option.
The VX-160COAX master unit connects with the slave unit via a BNC connector and 5C2V cable, and up to 4,500ft distance with a coaxial cable when a 48V high power adaptor is utilized. Managers are able to select different data rates from the DIP switch on each unit for varying distances and gauges. In full-duplex mode, the maximum data rate is 60 Mbps, depending on the cable gauges.
This unit adheres to the Safety Extra Low Voltage (SELV) requirement. A VX-160COAX system provides a budget friendly solution for remote power applications such as LAN-to-LAN connection, Video Streaming, FTTB, and MDU/MTU over a single twisted line.
- Coaxial PoE Ethernet Extender for 10/100M Fast Ethernet interfaces
- Built-in BNC Connectors
- Distances of up to 4,500ft for 5C2V Coaxial cable
- Line rate up to 60 Mbps full duplex
- DIP Switches for line rate settings with Slave following Master
- Max. 15.4 watts for remote PD device
- IEEE 802.3af PoE Compliant
- Auto MDIX for 10/100 BaseT Ethernet LAN Ports
- Easy installation with indoor models
- Low-Latency for Video / Voice / Data applications
- PoE over Coax