TAA Compliant

Showing 1–30 of 74 results

Views:

2E10-110-KIT-A Indoor Ethernet & Power over 2-Wire RX/TX Kit with 1 FE PoE interface

$333.00

The 2E10-110-KIT-A includes one 2E10-110-RX EPoC adapter, one 2E10-110-TX EPoC adapter and one bundled 65W@56VDC power adapter. The EPo2 (Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one EPo2 unit at each end of PoE IP device (PD) & Ethernet Switch port.

In addition to reuse 2-wire cable, the EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire 26AWG cable.

AT-100 Pole Mount Adapter

$69.00

Supported Models
Camera Housing : A10/A50/P20/P50/P60 Series
Junction Box: JB-100
Power Box:PB-024-1AC, PB-024-2AC
Outdoor PoE Switch: H21/H40/H80 Series

AT-101 Retractable Pole Mount Adapter

$97.00

Supported Models
Camera Housing : A10/A50/P20/P50/P60 Series
Junction Box: JB-100
Power Box:PB-024-1AC, PB-024-2AC
Outdoor PoE Switch: H21/H40/H80 Series

AT-200 Corner Mount Adapter

$69.00

Supported Models
Camera Housing : A10/A50/P20/P50/P60 Series
Junction Box: JB-100
Power Box: PB-024-1AC, PB-024-2AC
Outdoor PoE Switch: H21/H40/H80 Series

E29-101 1-port Outdoor 30/60/95W PoE Extender

The E29 series is IP67-rated & harden-graded PoE Extender, operating temperature from -40°C~60°C. It’s ideal for harsh outdoor environment where two units of E29 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 300m from end to end or up to 500m by star topology.No power adapter required, E29 PoE Extender is powered by PoE Injector, Middle-Span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

E29-102 2-port Outdoor 30/60/95W PoE Extender

$125.25

The E29 series is IP67-rated & harden-graded PoE Extender, operating temperature from -40°C℃~60°C. It’s ideal for harsh outdoor environment where two units of E29 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 300m from end to end or up to 500m by star topology.No power adapter required, E29 PoE Extender is powered by PoE Injector, Middle-Span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

E69-102 Outdoor 30W/60W/95W PoE bt GbE Extender

$175.25

The E69-102 is IP67-rated & harden-graded Gigabit PoE Extender, operating temperature from -40°C~65°C. It’s ideal for harsh outdoor environment where two units of E69-102 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 500m from end to end. No power adapter required, E69-102 Gigabit PoE Extender is powered by Bt/UPoE Injector, Middle-Span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

The E69-102 has a built-in voltage booster that guarantees stable voltage output for your high powered PoE devices.

E69-602 Outdoor 30W/60W/95W PoE bt GbE Extender Plus

$262.75

The E69-602 is IP67-rated & harden-graded Gigabit PoE Extender, operating temperature from -40°~65°C. It’s ideal for harsh outdoor environment where two units of E69-602 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 500m from end to end. No power adapter required, E69-602 Gigabit PoE Extender is powered by 802.3bt/UPoE Injector, Middle-Span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

The E69-602 is built-in voltage booster guarantees stable voltage output for your high powered PoE devices.

H40-044-30-150 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 2 RJ45 and 2 SFP interfaces

$625.00

The H40-044-30-150 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 150 watts, the H40-044-30-150 meets the demand of PoE power for any HD IP surveillance applications. It enables the outdoor connection of PoE power devices (PDs) to the network, including outdoor PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The H40 series of Industrial Unmanaged PoE Switches supports IP67, 6KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65 °C.

The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.

H40-044-60-250 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 60W PoE + 2 RJ45 and 2 SFP interfaces

$875.00

The H40-044-60-250 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 60-watt UPoE. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 250 watts, the H40-044-60-250 meets the demand of high-power PoE for IP surveillance applications such as outdoor PTZ Speed Dome camera, License Plate Recognition(LPR) camera with high- power illuminator, and outdoor camera supporting cold start function.

The H40 series of Industrial Unmanaged PoE Switches supports IP67, 6KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65°C.

The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.

H40-044-90-250 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 95W PoE + 2 RJ45 and 2 SFP interfaces

$875.00

The H40-044-90-250 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 95-watt PoE. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 250 watts, the H40-044-90-250 meets the demand of PoE power for any HD IP surveillance applications. It enables the outdoor connection of PoE power devices (PDs) to the network, including outdoor PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The H40 series of Industrial Unmanaged PoE Switches supports IP67, 12KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65°C.

The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.

H40-082-30-250 Unmanaged Industrial Outdoor PoE Switch with 8 x 30W PoE and 2 SFP interfaces

$750.00

The H40-082-30-250 is a Gigabit PoE solution for the outdoor environment and offers eight of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit SFP fiber slots for uplink.

With a total PoE power budget up to 250 watts, the H40-082-30-250 meets the demand of PoE power for any HD IP surveillance applications. It enables the outdoor connection of PoE power devices(PDs) to the network, including outdoor PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The H40 series of Industrial Unmanaged PoE Switches supports IP67, 6KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65 °C.

The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.

H42-042-30-075 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 1 selectable 24/56VDC PoE and 1 SFP interface

$375.00

The H42-042-30-075 is Industrial Gigabit Adjustable PoE Switch designed with IP67 & IK10, 6KV PoE Ethernet port surge protection, 10KV surge protection in AC power, and operation temperature between -40°C and 65°C during harsh weather conditions. They enable outdoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other industrial applications. The H42-042-40-075 provides 4 ports Gigabit PoE with 1 port Gigabit adjustable 24VDC or 56VDC PoE as well as additional SFP transceiver slots for flexible uplink.

The H42-042-30-075 as easy-to-install power source equipment (PSE) and provide power up to 30W per port.

H80-044-30-150 Managed Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 2 RJ45 and 2 SFP interfaces

$1,180.00

The H80-044-30-150 PoECam Switch, a 4-Port 30W PoE + 2-port RJ45 + 2-port SFP L2 plus Gigabit switch, is designed with IP67, 6KV PoE Ethernet surge protection, and 40KV surge protection in power. It enables connection for outdoor PoE PDs such as IP Cameras & wireless APs to operate between -40℃ ~ 65℃ during harsh weather conditions.

Besides Layer 2 plus managed PoE Gigabit switch features, H80-044-30-150 is also an IP camera controller to be easy overview & management for IP cameras complying with ONVIF even installers are not familiar with advanced features of Layer 2 plus managed PoE switch. A centralized GUI (Graphic User Interface) makes it easy to find ONVIF cameras and generate topology automatically once IP cameras are connected to H80-044-30-150.

In addition, installers can easily catch comprehensive individual ONVIF camera information including camera list, IP/MAC address, topology, power consumption, PoE, and traffic monitoring thru Web browser. Furthermore, an intuitive web GUI leads installer to group VLAN across switches, diagnose cable, and reboot camera thru graphic topology. H80-044-30-150 bringing the ONVIF cameras benefit of simplified management, reduced complexity, lower cost for IP surveillance deployments.

C70 series, a Master PoECam L2 plus managed switch, must be installed within indoor control center in order to optimize comprehensive H80-044-30-150 features.

H80-044-60-250 Managed Industrial Outdoor Gigabit PoE Switch with 4 x 60W PoE + 2 RJ45 and 2 SFP interface

$1,347.50

The H80-044-60-250 PoECam Switch, a 4-Port 60W PoE + 2-port RJ45 + 2-port SFP L2 plus Gigabit switch, is designed with IP67, 6KV PoE Ethernet surge protection, and 40KV surge protection in power. It enables connection for outdoor PoE PDs such as IP Cameras & wireless APs to operate between-40℃ ~ 60℃ during harsh weather conditions.

Besides Layer 2 plus managed PoE Gigabit switch features, H80-044-60-250 is also an IP camera controller to be easy overview & management for IP cameras complying with ONVIF even installers are not familiar with advanced features of Layer 2 plus managed PoE switch. A centralized GUI (Graphic User Interface) makes it easy to find ONVIF cameras and generate topology automatically once IP cameras are connected to H80-044-60-250.

In addition, installers can easily catch comprehensive individual ONVIF camera information including camera list, IP/MAC address, topology, power consumption, PoE, and traffic monitoring thru Web browser. Furthermore, an intuitive web GUI leads installer to group VLAN across switches, diagnose cable, and reboot camera thru graphic topology. H80-044-60-250 bringing the ONVIF cameras benefit of simplified management, reduced complexity, lower cost for IP surveillance deployments.

C70 series, a Master PoECam L2 plus managed switch, must be installed within indoor control center in order to optimize comprehensive H80-044-60-250 features.

JB-100 Junction Box

$97.00

Supported Models : A10/P20/A50/P60 Camera Housing Series

M30-011-01 Industrial Media Converter with 1 x GbE and 1 x GbE SFP interface

$124.00

The M30-011-01 is an industrial-grade Gigabit Media Converter, featuring one 100/1000BASE-X SFP fiber port and one 10/100/1000BASE-T copper port in an IP30-rated rugged but compact-size case. Being able to operate under the temperature ranging from -40 to 75 degrees C, the M30-011-01 provides reliable, stable and continuous long-range data transmission and can be installed in any harsh environment without taking space into consideration.

M30-011-30 Industrial Media Converter with 1 x GbE PoE and 1 x GbE SFP interface

$165.00

The M30-011-30 is the industrial-grade Gigabit PoE+ Media Converter, featuring one 100/1000BASE-X SFP fiber port and one 10/100/1000BASE-T 802.3at PoE+ copper port in an IP30-rated rugged but compact-size case. Being able to operate under the temperature ranging from -40 to 75 degrees C, the M30-011-30 provides reliable, stable and continuous long-range data transmission and can be installed in any harsh environment without taking space into consideration.

P2000-AI Industrial 24VAC Cold Start Camera Housing

$303.00

The P2000-AI camera housing is constructed from cast aluminum to meet IP68 and IK10 standards. The enclosure is spacious for wide-angle lenses or long-distant remote focus lenses. The P20 series supports 24VAC power input and are industrial models, all of which are equipped with window heater & blower. The P2000-AI camera housing includes an intrusion alarm switch, adjustable sun shade, integrated ITB (Illuminator Touch Board) for an optional snap in VAIR illuminator. P2000-AI is especially equipped with built-in camera heater, supporting cold start in the environment of -40°C.

Included with the P2000-AI:

  • IP68/IK10 impact rated cast aluminum housing
  • Window heater & blower
  • Adjustable sun shade
  • Intrusion alarm switch
  • ITB (Illuminator Touch Board) for optional snap in VAIR illuminator
  • Accommodates box cameras equipped with wide-angle lenses or long-distance lenses (8 to 80 mm)
  • Camera heater supports cold start at -40°C

Optional Accessories:

P2000-AIW Industrial 24VAC Cold Start Camera Housing with Wiper

$385.00

The P2000-AIW camera housing is constructed from cast aluminum to meet IP68 and IK10 standards. The enclosure is spacious for wide-angle lenses or long-distant remote focus lenses. The P20 series supports 24VAC power input and are industrial models, all of which are equipped with window heater & blower. The P2000-AIW camera housing includes an intrusion alarm switch, adjustable sun shade, integrated ITB (Illuminator Touch Board) for an optional snap in VAIR illuminator. P2000-AIW is especially equipped with built-in camera heater, supporting cold start in the environment of -40°C and also has a built-in wiper along with the enclosure.

Included with the P2000-AIW:

  • IP68/IK10 impact rated cast aluminum housing
  • Window heater & blower
  • Adjustable sun shade
  • Intrusion alarm switch
  • ITB (Illuminator Touch Board) for optional snap in VAIR illuminator
  • Accommodates box cameras equipped with wide-angle lenses or long-distance lenses (8 to 80 mm)
  • Camera heater supports cold start at -40°C
  • Built-in Wiper

Optional Accessories:

P2000-IW Industrial 24VAC Camera Housing With ITB And Wiper

$275.00

The P2000-IW, 24VAC power input, is an industrial camera housing equipped with wiper as well as a heater/blower to defog the window. The P2000-IW camera housing includes an intrusion alarm switch, adjustable sun shade, integrated ITB (Illuminator Touch Board) for an optional snap in VAIR illuminator. The industrial camera housing is constructed cast aluminum to meet IP66/IK10 standards and all components are tested between -20°C and 65°C.

Included with the P2000-IW:

  • IP66/IK10 impact rated cast aluminum housing
  • Window heater & blower
  • Built-in wiper
  • Adjustable sun shade
  • Intrusion alarm switch
  • Accommodates box cameras equipped with wide-angle lenses or long-distance lenses (8 to 80mm)
  • ITB (Illuminator Touch Board) for optional snap in VAIR illuminator

Optional Accessories:

P6000-IW Industrial 95W PoE Camera Housing with ITB and Wiper

$399.00

The P6000-IW is a 95W PoE camera housing that is backward compatible with PoE 802.3af/at. It is an industrial UPoE camera housing equipped with wiper as well as a heater/blower to defog the window. The P6000-IW camera housing includes an intrusion alarm switch, adjustable sun shade, integrated ITB (Illuminator Touch Board) for an optional snap in VAIR illuminator. The P6000-IW is powered by UPoE over one Ethernet cable. The industrial camera housing is constructed cast aluminum to meet IP66/IK10 standards and all components are tested between -20°C and 65°C.

Included with the P6000-IW:

  • IP66/IK10 impact rated cast aluminum housing
  • Window heater & blower
  • Built-in wiper
  • Adjustable sun shade
  • Intrusion alarm switch
  • Accommodates box cameras equipped with wide-angle lenses or long-distance lenses (8 to 80mm)
  • ITB (Illuminator Touch Board) for optional snap in VAIR illuminator

Optional Accessories:

P6900-IW-KIT-A Industrial 95W 802.3bt PoE ANPR Camera Housing Kit with ITB, Wiper, LED and Bracket

$878.00

The P6900-IW-KIT-A is a UPoE camera housing kit that is supported by 95W PSE over one Ethernet cable. This camera housing supports Automatic Number Plate Recognition (ANPR) supported by PoE individually.  AETEK provides a series of all-in-one ANPR camera housings to fit most box cameras equipped with wide-angle lenses or long-distance lenses (8 to 80mm). The P6900-IW-KIT-A camera housing is constructed from aluminum die casting to meet IP66/IK10 standards. This industrial camera housing kit is equipped with heater, blower, wiper, and snapped in 48W IR LED. This LED is using VAIR-IR technology to cover 2-lane ANPR detection.

Included with the P6900-IW-KIT-A:

  • IP66/IK10 impact rated cast aluminum housing
  • 95W UPoE input
  • Window heater & blower
  • Built-in wiper
  • Wall mount bracket (BK-101)
  • Built-in 48W VAIR LED (VR-481)
  • ITB (Illuminator Touch Board) for snap in VAIR illuminator
  • Adjustable sun shade
  • Intrusion alarm switch
  • Accommodates box cameras equipped with wide-angle lenses or long-distance lenses (8 to 80mm)

PB-024-2AC Outdoor Power/Junction Box

$207.00

Input Power: 115/230VAC
Output Power : 24VAC/6A
Supported Models : A10/P20 Camera Housing Series

SD-101 Indoor PoE Surge Protector

$62.50

The SD series surge protectors are proven to keep PoE switches, PoE PDs, and other IP devices safe from lightning and other forms of electrical interference, including power surges and spikes over networking cables. Two sub-models (the SD-101 and SD-201) are classified as hardened-grade surge protectors, and will operate in harsh weather conditions from -40°C to 85 °C.

The SD-101 is designed to be deployed besides PoE switches, or inside junction or power boxes. With a robust operating temperature range, the SD-101 will prevent surges of up to 16KV and features plug-and-play installation.

SD-201 Outdoor bt/UPoE/at/af PoE Surge Protector

$93.00

The SD series surge protectors are proven to keep PoE switches, PoE PDs, and other IP devices safe from lightning and other forms of electrical interference, including power surges and spikes over networking cables. Two sub-models (the SD-101 and SD-201) are classified as hardened-grade surge protectors, and will operate in harsh weather conditions from -40°C to 85 °C.

With a robust operating temperature range, the SD-201 will prevent surges of up to 16KV and features plug-and-play installation. Further, the SD-201 can be deployed on either a wall or pole mount and has the added protection of an IP67-rated metal enclosure for guaranteed operation in any environment.

SD-301 EPoC Surge Protector

$72.00

The SD-301 is a EPoC surge protection device to prevent Signal/Power path from damage of surge impulse. This design is fit for EPoC application. Additionally, the operation indicator will turn on while protector being out of life. The SD-301 is harden-graded surge protectors operating between -40°C and 85°C & plug-and-play surge protectors defending the surge up to 6KV. The SD-301 is deployed beside EPoC RX device.

TE10-110-KIT-A Indoor Ethernet & Power over UTP/STP RX/TX Kit with 1 FE PoE interface

$363.00

The TE10-110-KIT-A includes one TE10-110-TX EPoT transmitter, one TE10-110-RX EPoT receiver and one 65W@56VDC power adapter.

The TE10-110-TX, a 1-to-1 EPoT (Ethernet & Power over UTP/STP Cable) transmitter(TX) equipped with 1 EPoT port & 1 RJ-45 PoE port, is designed to connect a remote PoE IP camera over single UTP/STP Cat.5e/6 cable without requiring extra power supply. This cutting-edge model delivers data and power at long range up to 1,200m for a PoE IP camera.

TE10-110-RX is an EPoT (Ethernet & Power over UTP/STP Cable) receiver(RX) equipped with 1 EPoT port & 1 LAN port. It is powered by 65W power adapter. This cutting-edge model is a long range PoE solution providing data & power to EPoT TX adapter and PoE IP camera over single UTP/STP cable up to 1,200m(3,937ft).

Loading

Shopping cart