Products

Showing 1–30 of 143 results

Views:

2E10-110-KIT-A Indoor Ethernet & Power over 2-Wire RX/TX Kit with 1 FE PoE interface

$333.00

The 2E10-110-KIT-A includes one 2E10-110-RX EPoC adapter, one 2E10-110-TX EPoC adapter and one bundled 65W@56VDC power adapter. The EPo2 (Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one EPo2 unit at each end of PoE IP device (PD) & Ethernet Switch port.

In addition to reuse 2-wire cable, the EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire 26AWG cable.

AT-100 Pole Mount Adapter

$69.00

Supported Models
Camera Housing : A10/A50/P20/P50/P60 Series
Junction Box: JB-100
Power Box: PB-024-1AC, PB-024-2AC
Outdoor PoE Switch: H21/H40/H80 Series

AT-101 Retractable Pole Mount Adapter

$97.00

Supported Models
Camera Housing : A10/A50/P20/P50/P60 Series
Junction Box: JB-100
Power Box: PB-024-1AC, PB-024-2AC
Outdoor PoE Switch: H21/H40/H80 Series

AT-200 Corner Mount Adapter

$69.00

Supported Models
Camera Housing : A10/A50/P20/P50/P60 Series
Junction Box: JB-100
Power Box: PB-024-1AC, PB-024-2AC
Outdoor PoE Switch: H21/H40/H80 Series

C11-042-30-065 6-Port 10/100 with 4PoE Ports and 2 EXPoE Ports (65W)

$55.00

AETEK’s C11 indoor unmanaged EXPoE switch series, equipped with DIP switch, provides an EX “Extensive” operation mode. The C11 series is specially designed for IP Surveillance application as well as standard 802.3af/at PoE functions. The EX mode delivers extreme distances of camera images and powers a maximum of up to 250m via specific EX ports for long reach PoE IP cameras. The C11 series also features an extra 20% range of input voltage tolerance, lightning surge protection of AC power and PoE surge protection to prevent the damage caused by outside unstable AC power, lightning surge and power spike. These unique features reduce the costs to replace a damaged fault unit.

The C11 series has five sub models consisting of 6, 10, 18, and 26 ports with a range of power budgets from 65W to 380W for IP
surveillance.

Features:

  • 2 of the 4 PoE ports can be adjusted as EX PoE mode
  • Total power budget 65W
  • 15.4W/30W 802.3af/802.3at compliant
  • 4KV PoE surge protection each port
  • 4KV AC surge protection
  • 20% range of input voltage tolerance
  • Circuit protection prevents power interference between ports
  • Detects PoE PD (power device) automatically
  • EX mode OFF reaches PoE camera up to 100m@100Mbps via any port
  • EX mode ON reaches 802.3af camera up to 250m@10Mbps via EXPoE ports
  • EX mode ON reaches 802.3at camera up to 200m@10Mbps via EXPoE ports

C11-082-32-120 8-Port 10/100 with 8 PoE Ports + 2 EXPoE Ports and 2 GbE Combo Ports (120W)

$152.00

AETEK’s C11 indoor unmanaged EXPoE switch series, equipped with DIP switch, provides an EX “Extensive” operation mode. The C11 series is specially designed for IP Surveillance application as well as standard 802.3af/at PoE functions. The EX mode delivers extreme distances of camera images and powers a maximum of up to 250m via specific EX ports for long reach PoE IP cameras. The C11 series also features an extra 20% range of input voltage tolerance, lightning surge protection of AC power and PoE surge protection to prevent the damage caused by outside unstable AC power, lightning surge and power spike. These unique features reduce the costs to replace a damaged fault unit.

The C11 series has five sub models consisting of 6, 10, 18, and 26 ports with a range of power budgets from 65W to 380W for IP
surveillance.

Features:

  • 15.4W / 802.3af & 30W / 802.3at compliant
  • 6KV PoE surge protection each port
  • 4KV AC surge protection
  • Extra 20% range of input voltage tolerance
  • Circuit protection prevents power interference between ports
  • Detects PoE PD (power device) automatically
  • EX mode OFF reaches PoE camera up to 100m@100Mbps via any PoE port
  • EX mode ON reaches 802.3af camera up to 250m@10Mbps via EXPoE ports
  • EX mode ON reaches 802.3at camera up to 200m@10Mbps via EXPoE ports

C11-162-31-250 16-Port 10/100 with 8 EXPoE Ports and 2 GbE Combo Ports (250W)

$330.00

AETEK’s C11 indoor unmanaged EXPoE switch series, equipped with DIP switch, provides an EX “Extensive” operation mode. The C11 series is specially designed for IP Surveillance application as well as standard 802.3af/at PoE functions. The EX mode delivers extreme distances of camera images and powers a maximum of up to 250m via specific EX ports for long reach PoE IP cameras. The C11 series also features an extra 20% range of input voltage tolerance, lightning surge protection of AC power and PoE surge protection to prevent the damage caused by outside unstable AC power, lightning surge and power spike. These unique features reduce the costs to replace a damaged fault unit.

The C11 series has five sub models consisting of 6, 10, 18, and 26 ports with a range of power budgets from 65W to 380W for IP
surveillance.

Features:

  • 8 of the 16 PoE ports can be adjusted as EX PoE mode
  • Total Power budget 250W
  • 15.4W/30W 802.3af/802.3at compliant
  • 6KV PoE surge protection each port
  • 4KV AC surge protection
  • 20% range of input voltage tolerance
  • Circuit protection prevents power interference between ports
  • Detects PoE PD (power device) automatically
  • EX mode OFF reaches PoE camera up to 100m@100Mbps via any port
  • EX mode ON reaches 802.3af camera up to 250m@10Mbps via EXPoE ports
  • EX mode ON reaches 802.3at camera up to 200m@10Mbps via EXPoE ports

C50-162-30-250 Managed ONVIF GbE Switch with 16 X 30W PoE and 2 SFP Interfaces

$650.00

C50-162-30-250, a basic Layer 2 Smart PoE Switch, is equipped with 16-port Gigabit PoE (10M/100M/1G) and 2-port Gigabit (100M/1G) SFP transceiver slots for flexible link. With total power budget up to 250W, C50-162-30-250 is an optimum framework and solution forPoEIP device such as IP cameras and wireless APs complying ONVIF, UPnP or ARP protocol.

AETEK’s C50 series to ONVIF cameras will not only be a smart L2 PoE Gigabit switch, but also be the centralized IP surveillance controller. The functions of IP surveillance controller incorporate multi-brand ONVIF IP surveillance products including camera, NVR, and video server to configure and manage over a single IP network. The unique benefits by dedicated TAB & GUI generate IP surveillance topology automatically once ONIF cameras are connected to C50 smart L2 PoE switch.

Installers can easily catch comprehensive individual ONVIF camera information including camera list, IP/MAC address, topology, power consumption, and traffic monitoring via web browser. Furthermore, an intuitive web GUI leads installer to group VLAN across switches, reboot camera, and diagnose cable via graphic topology. C50 series is the innovative SmartL2 PoE switch that brings the ONVIF cameras to benefit of simplified management, reduced complexity, lowered cost for IP surveillance deployments.

C50-242-30-370 Managed ONVIF GbE Switch with 24 X 30W PoE and 2 SFP Interfaces

C50-242-30-370, a basic Layer 2 Smart PoE Switch, is equipped with 24-port Gigabit PoE (10M/100M/1G) and 2-port Gigabit (100M/1G) SFP transceiver slots for flexible link. With total power budget up to 370W, C50-242-30-370 is an optimum framework and solution forPoEIP device such as IP cameras and wireless APs complying ONVIF, UPnP or ARP protocol.

AETEK’s C50 series to ONVIF cameras will not only be a smart L2 PoEGigabit switch, but also be the centralized IP surveillance controller. The functions of IP surveillance controller incorporate multi-brand ONVIF IP surveillance products including camera, NVR, and video server to configure and manage over a single IP network. The unique benefits by dedicated TAB & GUI generate IP surveillance topology automatically once ONIF cameras are connected to C50 smart L2 PoE switch.

Installers can easily catch comprehensive individual ONVIF camera information including camera list, IP/MAC address, topology, power consumption, and traffic monitoring via web browser. Furthermore, an intuitive web GUI leads installer to group VLAN across switches, reboot camera, and diagnose cable via graphic topology. C50 series is the innovative SmartL2 PoE switch that brings the ONVIF cameras to benefit of simplified management, reduced complexity, lowered cost for IP surveillance deployments.

C51-164-30-250 Managed 16-Port 10/100/1000 PoE Switch with 2 GbE and 2 SFP Ports (250W)

$418.00

The C51 series from AETEK offers a broad range of L2 Smart PoE Switches, equipped with multi-port Gigabit PoE (10M/100M/1G) and SFP transceiver (1G) slots for flexible link. The C51 series has three sub-models including 8 ports, 16 ports, and 24 ports complying with IEEE 802.3af/at standards with sufficient PoE power budget for any application.

Features:

  • Layer 2 Switch
  • 802.1d (STP), 802.1w (RSTP), 802.1s (MSTP)
  • Loop protection
  • LACP
  • QoS
  • VLAN
  • Ethernet cable length measurement
  • DHCP Server
  • Flexible SFP transceiver ports for uplink
  • 15.4W/30W per port IEEE802.3af/at compliant
  • Supports 10/100/1000Mbps data rates
  • Support Auto-MDI/MDIX
  • Built-in 12KV surge protection for each PoE port
  • IEEE 802.3az Energy Efficient Ethernet standard for green power
  • 19″ Rackmount installation

C51-244-30-370 Managed 24-Port 10/100/1000 PoE Switch with 2 GbE and 2 SFP Ports (370W)

$565.00

The C51 series from AETEK offers a broad range of L2 Smart PoE Switches, equipped with multi-port Gigabit PoE (10M/100M/1G) and SFP transceiver (1G) slots for flexible link. The C51 series has three sub-models including 8 ports, 16 ports, and 24 ports complying with IEEE 802.3af/at standards with sufficient PoE power budget for any application.

Features:

  • Layer 2 Switch
  • 802.1d (STP), 802.1w (RSTP), 802.1s (MSTP)
  • Loop protection
  • LACP
  • QoS
  • VLAN
  • Ethernet cable length measurement
  • DHCP Server
  • Flexible SFP transceiver ports for uplink
  • 15.4W/30W per port IEEE802.3af/at compliant
  • Supports 10/100/1000Mbps data rates
  • Support Auto-MDI/MDIX
  • Built-in 12KV surge protection for each PoE port
  • IEEE 802.3az Energy Efficient Ethernet standard for green power
  • 19″ Rackmount installation

E19-101 1-port Indoor 30/60/95W PoE Extender

$91.50

The E19 series, a small form factor, is an ideal for indoor environments where two units of E19 series can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 300m from end to end or up to 500m by star topology. No power adapter required, E19 PoE extender is powered by PoE injector, middle-span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

E19-102 2-port Indoor 30/60/95 W PoE Extender

The E19 series, a small form factor, is an ideal for indoor environments where two units of E19 series can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 300m from end to end or up to 500m by star topology.No power adapter required, E19 PoE extender is powered by PoE injector, middle-span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

E29-102 2-port Outdoor 30/60/95W PoE Extender

$125.25

The E29 series is IP67-rated & harden-graded PoE Extender, operating temperature from -40°C~60°C. It’s ideal for harsh outdoor environment where two units of E29 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 300m from end to end or up to 500m by star topology.No power adapter required, E29 PoE Extender is powered by PoE Injector, Middle-Span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

E59-102 Indoor 30W/60W/95W PoE bt GbE Extender

$115.00

The E59-102 is Gigabit PoE Extender is an ideal for indoor environments where two units of E59-102 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 500m from end to end. No power adapter required, E59-102 Gigabit PoE extender is powered by Bt/UPoE injector, middle-span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

The E59-102 is built-in voltage booster guarantees stable voltage output for your high powered PoE devices.

E59-602 Indoor 30W/60W/95W PoE bt GbE Extender Plus

$252.00

The E59-602 is Gigabit PoE Extender is an ideal for indoor environments where two units of E59-602 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 500m from end to end. No power adapter required, E59-602 Gigabit PoE extender is powered by Bt/UPoE injector, middle-span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

The E59-602 is built-in voltage booster guarantees stable voltage output for your high powered PoE devices.

D40-044-91 Unmanaged Industrial PoE Switch With 4 X 90W 802.3bt PoE + 2 RJ45 And 2 SFP Interfaces

$360.00

The D40-044-91 is an IP30 Gigabit PoE solution for Industrial environments and offers four 10/100/1000BASE-T ports featuring 60W/90W bt PoE. Further empowering the unit is 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 240 watts, the D40-044-91 meets the demand of PoE power for any HD IP surveillance applications. It enables the connection of PoE power devices (PDs) to the network, including PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The D40 series of Industrial Unmanaged PoE Switches supports 6KV surge protection for each Ethernet port and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 75 °C.

D40-044-91-DC Unmanaged Industrial PoE Switch With 4 X 90W 802.3bt PoE + 2 RJ45 And 2 SFP Interfaces (12~56V DC)

$535.00

The D40 series of Industrial Unmanaged PoE Switches are designed with IP30, 6KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C during harsh weather conditions. Besides enabling connections of PoE af/at PDs, the D40-044-91-DC is specially designed for latest PoE PoH/802.3bt PoE (>25.5W) PDs such as IR PTZ cameras, multi-sensor cameras, and long range PoE applications.

The D40 series provides a multi-port Gigabit PoE (10M/100M/1G) delivering data and power to PoE PDs over a single network cable as well as additional SFP transceiver slots for flexible uplink. The D40 series has easy-to-install power source equipment (PSE) and provides power up to 90W per port.

D60-044-91 Managed L2 Industrial PoE Switch With 4 X 90W 802.3bt PoE + 2 RJ45 And 2 SFP Interfaces

$675.00

The D60-044-91 Industrial L2 Plus Managed PoE Switch is designed with 6KV Ethernet port surge protection and industrial grade protection that operates between -40°C and 75°C for harsh weather conditions. The D60 series enables outdoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other outdoor industrial applications.

The D60 series provides multi-port Gigabit PoE (10M/100M/1G) delivering data and power to PoE PDs over a single network cable and additional SFP transceiver slots for flexible uplink. The D60 series has three sub models classified as power source equipment (PSE) and provide PoE budget up to 30W or 60W per port.

Besides general functions of L2 plus & basic L3 switch such as QoS, security, spanning tree, cable length measurement, and SNMP v1/v2c/v3, a dedicated web graphic user interface of IP surveillance is easy to configure and manage IP device. It automatically generates network topology maps, cable diagnostic, and PoE management.

Auto Discovery

The D60 series can automatically discover and classify any ONVIF devices such as network cameras, video servers with a simple click of mouse.

Auto DiscoveryE-MAP: Floor View

Upload custom floor images. Floor View allows for quick location of deployed surveillance devices and for export of this view in SVG/PNG/PDF format for easier inspection and planning.

eMap Floor ViewE-MAP

E-MAP includes topology view, Floor view and Google view to let users know its IP device’s location for easy management.

eMap ViewDevice Management

  1. Monitor IP Camera Status such as device name, Mac address, IP and power consumption…etc.
  2. Easy Network Configuration, Login in device Web UI, Check device cable connection, PoE on/off control and quick to traffic monitor …etc.

Cable DiagnosticCable Diagnostic

Show real-time connective status between each port of switch and ONVIF camera.

Device Management

E69-102 2-Port Outdoor 30W/60W/90W PoE bt GbE Extender

$138.00

The E69-102 is IP67-rated & harden-graded Gigabit PoE Extender, operating temperature from -40°C~65°C. It’s ideal for harsh outdoor environment where two units of E69-102 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 500m from end to end. No power adapter required, E69-102 Gigabit PoE Extender is powered by Bt/UPoE Injector, Middle-Span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

The E69-102 has a built-in voltage booster that guarantees stable voltage output for your high powered PoE devices.

E69-201 Outdoor 802.3bt PoE++ to 802.3af/at/bt PoE++ Extender

$140.00

The E69-201 is IP67-rated & harden-graded PoE Extender, operating temperature from -40°C℃~65°C. It’s ideal for harsh outdoor environment where two units of E69-201 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 300m from end to end or up to 500m by star topology.

No power adapter required, E69-201 PoE Extender is powered by PoE Injector, Middle-Span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumptions and PSE’s power budget per port.

E69-202 2-Port Outdoor 802.3bt PoE++ to 802.3af/at/bt PoE++ Extender

$163.00

The E69-202 is IP67-rated PoE Extender with an operating temperature from -40℃~65°C. It’s ideal for harsh outdoor environments where two units of the E69-202 can be daisy-chain to prolong the range of PoE devices such as PoE cameras, wireless APs reaching up to 300m from end to end or up to 500m by star topology.

The E69-202 does not require a power adapter because the PoE Extender would be powered by a PoE Injector, Middle-Span Hub, or PoE switch over one networking cable. This would extend the Ethernet range depending on PD’s power consumptions and PSE’s power budget per port.

E69-602 2-Port Outdoor 30W/60W/95W PoE bt GbE Extender Plus

$289.00

The E69-602 is IP67-rated & harden-graded Gigabit PoE Extender, operating temperature from -40°~65°C. It’s ideal for harsh outdoor environment where two units of E69-602 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 500m from end to end. No power adapter required, E69-602 Gigabit PoE Extender is powered by 802.3bt/UPoE Injector, Middle-Span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

The E69-602 is built-in voltage booster guarantees stable voltage output for your high powered PoE devices.

H36-044-90 Industrial Gigabit 30W/60W/95W PoE Switch W/ 12~56VDC Input

$578.00

The H36-044-90 is an Industrial Gigabit PoE Switch that is designed with IP30, 12KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C during harsh weather conditions. They enable indoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other industrial applications. The H36-044-90 provide 4-port Gigabit 95W PoE with 2 port Gigabit RJ45 and 2 port Gigabit SFP transceiver slots for flexible uplink.

The H36-044-90 as easy-to-install power source equipment (PSE) and provide power up to 95W per port.

H40-044-30-150 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 2 RJ45 and 2 SFP interfaces

$625.00

The H40-044-30-150 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 150 watts, the H40-044-30-150 meets the demand of PoE power for any HD IP surveillance applications. It enables the outdoor connection of PoE power devices (PDs) to the network, including outdoor PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The H40 series of Industrial Unmanaged PoE Switches supports IP67, 6KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65 °C.

The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.

H40-044-60-250 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 60W PoE + 2 RJ45 and 2 SFP interfaces

$875.00

The H40-044-60-250 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 60-watt UPoE. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 250 watts, the H40-044-60-250 meets the demand of high-power PoE for IP surveillance applications such as outdoor PTZ Speed Dome camera, License Plate Recognition(LPR) camera with high- power illuminator, and outdoor camera supporting cold start function.

The H40 series of Industrial Unmanaged PoE Switches supports IP67, 6KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65°C.

The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.

H40-044-90-250 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 95W PoE + 2 RJ45 and 2 SFP interfaces

$875.00

The H40-044-90-250 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 95-watt PoE. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 250 watts, the H40-044-90-250 meets the demand of PoE power for any HD IP surveillance applications. It enables the outdoor connection of PoE power devices (PDs) to the network, including outdoor PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The H40 series of Industrial Unmanaged PoE Switches supports IP67, 12KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65°C.

The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.

H40-082-30-250 Unmanaged Industrial Outdoor PoE Switch with 8 x 30W PoE and 2 SFP interfaces

$750.00

The H40-082-30-250 is a Gigabit PoE solution for the outdoor environment and offers eight of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit SFP fiber slots for uplink.

With a total PoE power budget up to 250 watts, the H40-082-30-250 meets the demand of PoE power for any HD IP surveillance applications. It enables the outdoor connection of PoE power devices(PDs) to the network, including outdoor PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The H40 series of Industrial Unmanaged PoE Switches supports IP67, 6KV surge protection for each Ethernet port, 40KV surge protection in AC power, and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 65 °C.

The H40 series has three sub-models, each classified as easy-to-install power source equipment (PSE) and providing power of up to 30W or 60W per port.

Loading

Have a question? Need help with a custom order? Want to talk to an engineer about your project? CALL NOW or GET HELP

Shopping cart