Products

Showing 91–120 of 135 results

Views:

VX-700LRP-KIT Industrial Single Port Long Reach PoE Ethernet Extender Kit

$559.00

Versa Technology’s VX-700LRP-KIT is designed to extend the reach of Ethernet Data and IEEE 802.3at Power over Ethernet beyond its natural limitations of 100m for the network infrastructure. The VX-700LRP-KIT works in pairs for point to point connectivity. The VX-700-RT is a Long Reach POE Extender with single POE port (CPE). The VX-700-RT can be connected to a VX-701-CO Long Reach POE Extender (CO). The master unit at the central site (VX-701-CO) can transmit data and power over a single pair of telephone grade UTP wire up to 1,200m. Without the need for local power supply, each VX-700-RT is equipped with a 10/100/1000 Base-T IEEE 802.3at PoE port for a total power budget of 30W that can support any remote IEEE 802.3at powered device (PD). It is an ideal PoE extension solution for service providers to deploy networking applications in public areas that requires IP TV, Wireless AP, IP Phones and IP Cameras.

Features:

  • Complies to IEEE 802.3at PoE
  • Support wide temperature ranges for applications in harsh environments
  • Simultaneous transmission of Ethernet data and PoE Power over UTP wire
  • Centralized management of power supply
  • Eliminates the need for local power supply at remote sites
  • Easy cabling for quick installation
  • Long transmission distance up to 1200m for UTP wire
  • Quick deployment and easy maintenance
  • Flexible and efficient power management
  • Automatically switch between VDSL2 Profile 30a and 17a to utilize bandwidth performance

Reference Performance Data

UTP – 24AWG Copper Wire

UTP Reference Performance Data

VX-701LRP-KIT Industrial 4-Port Long Reach PoE Ethernet Extender Kit

Versa Technology’s VX-701LRP-KIT Long Reach PoE Extenders are designed to extend the reach of Data and IEEE 802.3at Power over Ethernet beyond its reach of 100m for the network infrastructure. The solution works in pairs for point to point connectivity. The master unit (VX-701-CO) at the central site can transmit data and power over a single pair of telephone grade UTP wires up to 1,200m or Coaxial cable up to 1,800m. On the receiving end is VX-701-RT Long Reach PoE Extender with 4 PoE (PSE) ports (CPE). Without the need for local power supply, each VX-701-RT is equip with four 10/100Base-TX IEEE 802.3at PoE Ports for total power budget of 30W that can support any remote IEEE 802.3at/af powered device (PD). It enables centralized management of power supply from a single location for easy, efficient and cost-effective installation. The VX-701-RT can provide 30W of PoE power to each ethernet interface if local power is available. Versa’s Long Reach PoE Extenders are an ideal PoE extension solution for service providers to deploy networking applications in public areas that require Wireless AP, IP Phones and IP Cameras.

  • Complies to IEEE 802.3at PoE
  • Industrial-Grade Extenders for applications in harsh environments
  • Simultaneous transmission of Ethernet data and PoE Power over UTP wire or coaxial cable
  • Centralized management of power supply
  • Eliminated the need for local power supply at remote sites
  • Easy cabling for quick installation
  • Long transmission distance up to 1200m for UTP wire or 1800m for coaxial cable
  • Quick deployment and easy maintenance
  • Flexible and efficient power management
  • Automatically switch between VDSL2 Profile 30a and 17a to utilize bandwidth performance
  • DIP Switch provides 30W PoE power to ethernet interface if local power is available

Reference Performance Data

UTP – 24AWG Copper Wire

UTP Reference Performance Data

Coaxial Cable

COAX Cable Chart

VX-160KIT VDSL2 SFP Modems (CO & RT)

$239.00

Versa Technology’s VX-160KIT is an MSA compliant SFP modem that allows traditional Ethernet switches, media converters and other network appliances to connect beyond typical Ethernet coverage (100 meters) over UTP by incorporating VDSL2 technology. Incorporated with the latest VDSL2 technology, this SFP modem can be easily adapted to existing applications with existing 2-wire cable, such as phone line, to avoid the cost of rewiring. It can drastically extend the Ethernet service on UTP wire with distance up to 3000 meters, and even with the rate of 100Mbps speed up to 400 meters on a standard Cat 5e 2 wire cable.

The SFP modems are also designed with flexible profiles settings for system integrator, or user, to select based on their unique applications and environment requirements. Symmetric profile can be applied as a standard Ethernet connection while Asymmetric profile can be used for other services like Video streaming or IP surveillance services which require high traffic flow in an uni-direction configuration. The SFP modems also support Telco grade noise cancellation techniques like Interleave, high SNR profile, and retransmission that can effectively eliminate the noise impact to ensure your service/control messages can securely deliver in a harsh environment.

With long reach coverage, high noise immunity, and compact board size, Versa’s VX-160KIT SFP modems are an ideal upgrade for your Enterprise or Industry applications.

  • Supports all VDSL2 standards defined in ITU –T G.993.2, G.994.1, G.997.1
  • MSA compliant hot pluggable electrical interface
  • Supports G.inp (G.998.4) and G.vector (G.993.5)

VX-5640N 4-Pair 2BASE-TL EFM Network Extender

$359.00

The VX-5640N EFM Network Ethernet Extender is designed to provide bonded high-speed Ethernet First Mile services over SHDSL on an existing copper infrastructure. It is a bridge mode modem that delivers Ethernet services with symmetrical bandwidth at rates up to 15.3 Mbps/Pair (TC-PAM 128). Implemented based on IEEE 802.3ah EFM standards for advanced performance and management features, 5600N Series ensures high reliability, low expense and maximum throughput. The introduction of EFM copper bonding technology allows delivery of higher bandwidth to longer distances over multiple copper pairs, enabling a good alternative in place where fiber is not economical to deploy. This “Ethernet-pure” solution provides a seamless integration into today and tomorrow’s networks.

The VX-5640N extends the reach of Ethernet services to the sites by using bonded copper pairs. Up to 4 pairs can be bonded together for aggregated bandwidth over 61Mbps (TC-PAM 128). Designed with standard-based EFM technology (2BASE-TL), deployment of Ethernet services with VX-5640N is quick and simple on the existing copper plant. It operates mainly in Point-to-Point connection between remote offices and enterprise headquarter, providing symmetrical high-speed connectivity that is ideal for large and small-to-medium enterprises to deliver business-class Ethernet service.

Network performance is significantly enhanced by eliminating unnecessary conversion of packet formats when transiting between Ethernet (LAN) and legacy ATM network (WAN). User-friendly Ethernet also makes it possible to save unnecessary truck roll costs and training costs. It leads to minimized risk bearing and quick return on investment for both service providers and enterprises.

The VX-5640N operates the SHDSL link in either EFM mode or ATM mode. It is designed to deliver business class Ethernet Service under EFM mode while providing the flexibility to be compatible with the existing DSLAM infrastructure under ATM mode. The unit can be managed by different ports and applications including comprehensive command-line interface (CLI), Telnet, user-friendly GUI-based Web Browser Interface and SNMP.

The unit provides future-proof features meeting Ethernet Quality of Service (QoS) and Class of Service (CoS) requirements by utilizing 802.1q VLAN capabilities, four levels of priorities, traffic flow control and rate control. This traffic management and QoS features enable service providers to offer highly profitable and value-added services to a vast majority of business and institutional sites.

 

TACPAM-32-16 (Auto Mode)

VX-5640N TACPAM 32/16

TCPAM-64/128 (Optimal Mode)

VX-5640N TCPAM-64/128

TCPAM-64/128 (TC-PAM 128 Mode)

TCPAM-64/128 (TC-PAM 128 Mode)

VX-IGPU-2708A Industrial L2+ Managed GbE UPOE Switch with 6-Port 10/100/1000TX Shared 4 UPoE + 2 100/1000 SFP

The VX-IGPU-2708A from Versa Technology is an industrial L2+ managed GbE UPoE switch offering powerful L2 and basic L3 features with better functionality and usability. In addition to the extensive management features, the VX-IGPU-2708A also provides carrier Ethernet features such as OAM/ CFM/ ERPS/ EPS/ PTPv2, of which makes it suitable for industrial and carrier Ethernet applications.

The VX-IGPU-2708A features 6 (10M/100M/1G) RJ45 ports with 4 UPoE ports (supports 802.3 at/af/UPoE and total of up to 240W), 2 GbE SFP ports and 1 RJ45 console port. The VX-IGPU-2708A also provides high hardware performance.

The embedded Device Managed System (DMS) feature allows users to easily configure, install and troubleshoot their video surveillance systems, wireless access points, and other industrial applications. The VX-IGPU-2708A is the ideal switch to deliver simple management, better user experiences, and the lowest total cost of ownership.

Features:

  • Rapid Ring (R-Ring)
  • Built in Device Management System (DMS)
  • iPush APP for real time alarm notification
  • ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
  • ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
  • IEEE 1588v2 PTP
  • IEEE 802.3ah OAM
  • IEEE 802.1ag CFM (ITU-T Y.1731 Performance monitoring)
  • DHCP Server
  • IEEE 802.3az Energy Efficient Ethernet standard for green Ethernet application
  • IEEE 802.3af/at/UPoE Power over Ethernet
  • IPv4/IPv6 L3 static route
  • EtherNet/IP (by request)
  • PROFINET (by request)

VX-IGP-1204F 12-Port Managed Industrial Switch with 8 IEEE 802.3at PoE Ports

$659.00

Versa Technology’s VX-IGP-1204F Managed Gigabit Ethernet switch provides 8 10/100/1000BaseT PoE PSE ports and 4 100/1000Base SFP ports. The unit complies with the IEEE 802.3at standard and is able to deliver up to 30 watts of power per port along with data on standard Ethernet cabling. The VX-IGP-1204F can be used to power any IEEE 802.3af/at compliant PoE PD device with the PoE power management feature. This will ease the deployment effort of planning PoE power budget and eliminates the need for additional wiring to reach a power source.

Features:

  • Provides 8 10/100/1000Base TX PoE ports, plus 4 100FX/1000BaseF SFP slots
  • IEEE 802.3af 15.4W / IEEE 802.3at 30W (2-pairs) High Power PoE
  • Total PoE power budget: Max. 240W PSE power delivered
  • 9K Jumbo frames
  • L2 wire-speed switching engine
  • 8K MAC forwarding addresses
  • Network redundant LACP, Spanning tree STP, RSTP & MSTP, and quick Ring fail-over protection (< 20ms)
  • Port-based / tag-based VLAN, IEEE 802.1ad / QinQ VLAN, add / remove VLAN tags
  • Multicasting supports IGMP v1/v2, proxy & snooping
  • Multicast / Broadcast / Flooding Storm Control
  • IEEE 802.1x access control
  • Per VLAN mirroring
  • CLI / Web / SNMP management interfaces
  • PoE PSE power management & PD power consumption monitoring
  • Dual power input & reverse power protection
  • DIN-Rail and wall mounting option

H30-044-30 Unmanaged Industrial PoE Switch With 4 X 30W PoE + 2 RJ45 And 2 SFP Interfaces

$220.00

The H30-044-30 is a Gigabit PoE solution for the Industrial environment and offers four of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 120 watts, the H30-044-30 meets the demand of PoE power for any HD IP surveillance applications. It enables the connection of PoE power devices(PDs) to the network, including PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The H30 series of Industrial Unmanaged PoE Switches supports 6KV surge protection for each Ethernet port and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 75°C.

VX-GPU2610 L2+ 4-Port 802.3bt PoE + 4-Port 10/100/1000TX + 2-Port 100/1000X SFP Managed GbE UPOE Switch (240W, DMS)

$489.00

The VX-GPU2610, from Versa Technology, is a L2+ Managed UPOE Switch that offers a full suite of L2 features and better PoE functionality and usability. This includes advanced L3 features such as Static Route that delivers better cost performance and lower total cost of ownership in Enterprise networks via fiber or copper connections. It also supports Universal Power Over Ethernet (UPOE), per port 60W.

The VX-GPU2610 delivers 4 (10M/100M/1G) RJ45, 4 PoE+/UPOE (Supports 802.3at/af, and up to 240W) ports, 2 Combo GbE RJ45/SFP ports and RJ45 Console port. The VX-GPU2610 provides high HW performance and environment flexibility for SMBs and Enterprises.

Versa’s VX-GPU2610 is ideal for delivering management simplicity, intuitive user experience, and lower total cost of ownership. The embedded Device Managed System is designed to be extremely easy-to-use, manage and install; IP phones, IP cameras, high power wireless APs or LED lighting for enterprise applications.

Feature-Rich Ethernet Switch for Enterprise-Class

The switch delivers advanced functionality in L2+ managed switch including Layer 3 static route, DHCP server, IPv6 support, LLDP, etc. It also has comprehensive security features such as IP source guard and ACL to guard your network from unauthorized access. It helps users to build on the market-leading price/performance with L2+ Managed GbE PoE switch, and provide secure, reliable and ease of use for enterprise/SMB deployments.

Easy to Install, Configure and Troubleshoot Through the Device Management System (DMS)

The DMS provides embedded functions to facilitate devices management at anytime and anywhere. Its user-friendly interface helps users to manage devices intuitively. It supports various IP device types (e.g. IP-phone, IP-camera, WiFi-AP) for end users to enhance manageability and save time/cost during installation/ maintenance stages.

Lower Total Cost of Ownership (TCO) with Energy-efficient Design

The unit is designed to help customers to reduce power consumption and lower the TCO with IEEE’s 802.3az Energy Efficient Ethernet features.

Universal Power over Ethernet Design

Universal Power Over Ethernet (UPOE), which extends the IEEE Power over Ethernet Plus (PoE+) standard to double the power per port to 60 watts, options to power IP devices with power-saving features like Power scheduling and PoE configuration.

Key Features

  • L2+ Managed features provide easier manageability, robust security and QoS.
  • Built in Device Management System (DMS)
  • DHCP Server
  • IPv4/IPv6 Management
  • PoE Port configuration and scheduling
  • Dual hot-swappable 1440W power supply
  • Support Universal Power over Ethernet (UPOE), 60W, standard
  • IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet

H30-044-90 Unmanaged Industrial PoE Switch with 4 X 95W PoE + 2 RJ45 and 2 SFP Interfaces

$385.00

The H30-044-90 is a Gigabit PoE solution for the Industrial environment and offers four of 10/100/1000BASE-T ports featuring 60W/95W UPoE. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 240 watts, the H30-044-90 meets the demand of PoE power for any HD IP surveillance applications. It enables the connection of PoE power devices(PDs) to the network, including PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The H30 series of Industrial Unmanaged PoE Switches supports 6KV surge protection for each Ethernet port and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 75°C.

VX-GPF1626 24-Port GbE RJ45 + 2-Port GbE RJ45/SFP Web Smart+ GbE Managed PoE+ Switch

$515.00

The VX-GPF1626 is a Web Smart+ Managed PoE+ Switch offering powerful L2 features, Layer 3 Static Routing, and reliable PoE functionality. The unit transports Ethernet services via fiber or copper connections. The VX-GPF1626 is equipped with 24 (10/100/1000) RJ45/PoE+ interfaces that support 802.3at/af devices and boasts a total PoE budget of 370W. The unit also features 2 Combo GbE RJ45/SFP ports. The VX-GPF1626 provides high HW performance ideal for SMBs and Enterprises. The VX-GPF1626 offers an intuitive management interface that makes it simple for new users to learn how to manage the unit.

Key Features:

  • Web Smart+ features provide easier manageability, basic security and QoS
  • Built in Device Management System (DMS)
  • DHCP Server
  • IPv4/IPv6 L3 static route
  • PoE Port configuration and scheduling
  • 802.3at high power PoE plus standard
  • IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet

H30-082-30 Unmanaged Industrial PoE Switch with 8 X 30W PoE + 2 RJ45 and 2 SFP Interfaces

$275.00

The H30-082-30 is a Gigabit PoE solution for the Industrial environment and offers eight of 10/100/1000BASE-T ports featuring 30-watt 802.3at. Further empowering the units are 2 additional Gigabit copper ports and another 2 extra SFP fiber slots for uplink.

With a total PoE power budget up to 240 watts, the H30-082-30 meets the demand of PoE power for any HD IP surveillance applications. It enables the connection of PoE power devices(PDs) to the network, including PoE IP cameras, PoE wireless access points (APs), and other industrial applications.

The H30 series of Industrial Unmanaged PoE Switches supports 6KV surge protection for each Ethernet port and harden-graded construction to ensure operation in harsh weather conditions ranging from -40°C to 75°C.

VX-GPH1610 8-Port 10/100/1000 RJ45/PoE+ with 2 Combo GbE RJ45/SFP Web Smart+ GbE Managed PoE+ Switch

$335.00

The VX-GPH1610 is a Web Smart+ Managed PoE+ Switch that offers powerful L2 features, Layer 3 Static Routing, and reliable PoE functionality. The unit transmits Ethernet services via fiber or copper connections.

The VX-GPH1610 features 8 (10M/100M/1G) RJ45/PoE+ (Support 802.3at/af, and total up to 250W) ports and 2 Combo GbE RJ45/SFP ports. The VX-GPH1610 provides high HW performance and is ideal for SMBs and Enterprises. The VX-GPH1610 offers simple management features lowering lowers the total cost of ownership.

Key Features:

  • Web Smart+ features provide simple management, basic security and QoS
  • Built in Device Management System (DMS)
  • DHCP Server
  • IPv4/IPv6 L3 static route
  • PoE Port configuration and scheduling
  • 802.3at high power PoE+ standard
  • IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet

H32-042-30 IP30 Industrial Gigabit PoE Switch with 4 X 30W PoE + 1 Selectable 24/56VDC PoE and 1 SFP Interface

$207.00

The H32-042-30 is an Industrial Grade Gigabit Selectable PoE Switch is designed with IP30, 6KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C during harsh weather conditions. It enables indoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other industrial applications. The H32-042-30 provides 4-port Gigabit PoE with 1 port Gigabit adjustable 24VDC or 56VDC PoE as well as additional SFP transceiver slots for flexible uplink.

The H32-042-30 as easy-to-install power source equipment (PSE) and provide power up to 30W per port.

VX-8900i Indoor Mini-CMTS Head End

$5,999.00

Based on the DOCSIS 3.0 and C-DOCSIS protocols, Versa Technology’s VX-8900i allows HFC networks to offer fiber speeds to their cable subscribers via legacy COAX lines.

With channel bonding technology, the VX-8900i series can utilize up to 16-QAM channels to achieve downstream (DS) data rates of up to 1.1Gbps; and utilize up to 4 QPSK/QAM channels to achieve upstream data rates of up to 160MBPS.

The unit’s downstream can be configured to data channels or IP QAM channel. The unit features 1RJ45 GE port and 1 SFP GE optical port. With layer 3 routing functions and perfect QoS, the unit can operate in a variety of working conditions and under different vendor requirements. The unit’s high bandwidth capacity and perfect QoS features make it ideal for Internet Protocol Television (IPTV) or Video on Demand (VOD).

The VX-8900i measures 19 inches 1U. The head end’s compact form factor makes the unit a cost-effective solution for HFC networks seeking to deploy a small-scaled network.

The VX-8900i series is compatible with DOCSIS 3.0 / 2.0 cable modems.

VX-MD4024 24 Port VDSL2 IP DSLAM

$2,199.00

Trunk Interface

  • RJ45 ports and mini-GBIC (SFP) connector ports (total of 2 ports per box).
  • Auto-selection between SFP and RJ-45 of Gigabit Ethernet interfaces with programmable priority.

For RJ-45 Interface:

  • Supports IEEE 802.3 10/100/1000 Base-T auto-sensing GbE. And the selection of speed for each port is independent.
  • Auto-adaptive between full-duplex and half-duplex operation modes for 10 and 100 Mbps operation speed on a per trunk port basis. The system only supports full-duplex mode for 1000 Mbps.

For SFP Interface:

  • Supports 1000 Base-TX/SX/LX/EX/ZX/LHX interfaces (defined in IEEE 802.3z) depending on plug-in SFP transceiver
  • Supports Ethernet frame that complies with IEEE 802.3z
  • Line Interface

General:

  • 24 xDSL subscribers lines and supports provisioning of the operation modes (VDSL2, ADSL/ ADSL2+) with a default of VDSL2 on a per port basis.
  • Handshake procedure of each DMT xDSL circuit complies with ITU-T G.994.1.
  • Physical layer management of each DMT xDSL circuit complies with ITU-T G.997.1.
  • xDSL subscriber interfaces support the following functions:
  • Upstream and downstream non-overlapped mode
  • Auto retrain
  • Scrambling functionality
  • FEC functionality
  • Trellis coding
  •  Bit-swap
  • Interleaving selection
  • Target, maximum and minimum SNR margins programmable per port basis, independently for UP/DOWN directions
  • Tx power adjustment while the SNR margin detected from the xDSL line exceeds the configured maximum SNR margin
  • Supports rate adaptation modes defined in ITU-T G.992.5 and
  • Line Interface (continued)
  • G.997.1 including Fixed (manually configured) and Adaptive At Init modes.
  • xDSL subscriber interface is able to support Fast Channel or Interleaved Channel independently for each xDSL port.
  • Supports Upstream Power Back-off (UPBO) while received power exceeds configured max-aggregation-PSD in the upstream direction.
  • Supports detection of Dying Gasp message from xDSL CPE and indicate a CPE power loss alarm in the management interface. This is cleared upon the commencement of a retrain operation (i.e. when the CPE becomes active once more).
  • Supports PSD shaping feature in VDSL2, ADSL and ADSL2+
  • Supports Downstream Power Back-Off (DPBO) for xDSL ports while operating in ADSL/2+ or VDSL2 mode

VDSL2:

  • VDSL2 functions comply with ITU-T G.993.2.
  • Supports selectable spectrum profile of 8a/b/c/d, 12a/b, 17a, and 30a for frequency bands (Annex A, B and C) defined in G.993.2 when operating in VDSL2 mode.
  • Support Packet Transport Mode (PTM) per G.993.2 when operating in VDSL mode.
  • Support provisioning the VDSL optional band types A, B and M (25K to 276K Hz) usage
  • Supports VDSL OAM communication channels including IB (Indicator Bits) channel, EOC (Embedded Operations Channel), and VOC (VDSL Overhead control Channel).
  • Supports selectable band plan A (profile 998, Annex A of G.993.2 and plan B (profile 997, Annex B of G.993.2) for each VDSL line on a per port basis.
  • Line rate of a VDSL2 line port can reach symmetrical 100/100 Mbps or asymmetrical 100/50 Mbps at an ideal loop condition.
  • Building POTS Splitter (optional)
  • Compliant with ETSI TS 101 952-1-1 option A for European, ETSI TS 101 952-1-3 for Annex B European ISDN, or ANSI 600.
  • The splitter/low pass filter is passive element. Even if the system loses power (power supply fails), the POTS will still function.

 Management Interface:

  • In-band management:  provide all system OAM&P functions: software updates, configurations import/export, and management system interaction through trunk port.
  • Out-band management:  provide two kinds of management interfaces. One is the RS-232 local craft interface for basic provisioning. Interface default configuration: 9600 baud rate, 8-bit data, none parity, and 1 stop bit. The other is a 10/100 Base-T auto-sensing Ethernet Interface.
  • OAM&P
  • Configuration Management
  • Performance Management
  • Fault Management
  • Status Monitoring.
  • Ethernet/IP Functionality

Supports L2 bridge functionalities defined in IEEE 802.1d including:

  • Automatic source MAC learning
  • Static source MAC address table provisioning
  • Maximum 8K MAC addresses allowed to be learned into MAC table per system; 1 ~ 4095 MAC addresses per trunk bridge port with a limitation of maximum 4096 MACs for total number assigned to two trunk interfaces; 0 ~ 512 MAC addresses per line bridge port
  • Provision-able aging time for MAC address table with a default of 300 seconds on a per bridge port basis.
  • The uplink and line bridge interfaces support Spanning Tree Protocol (STP) per IEEE 802.1D and Rapid Spanning Tree Protocol (RSTP) per IEEE 802.1w.
  • VLAN
  • Supports IEEE 802.1q Port-based VLAN and Protocol- based VLAN
  • Supports 512 active VLANs simultaneously and the VLAN ID ranges from 1 to 4094
  • Supports 2 layers VLAN stacking (“Q-in-Q”)
  • Supports VLAN translation
  • Supports port isolation functionality. When port isolation is enabled, no Layer-2 bridging between different ports (or subscriber lines) is supported in a VLAN
  • Supports static VLAN group and membership provisioning per bridge port basis
  • Supports configuring a port to be VLAN transparent (i.e., enabled for TLS)
  • Multicast
  • Supports Multicast forwarding with IGMP v1 [RFC 1112], v2 [RFC 2236], v3 [RFC 3376], and Multicast MAC address mapping
  • Supports up to 512 concurrent IGMP groups (multicast channels) per system and a multicast channel has a maximum of 512 copies
  • Supports profile-based Multicast Access Control (up to 24 configurable profiles) and assign any profile to a subscriber interface (the maximum number of registered multicast channels within a profile is 512)
  • Able to limit the maximum number (0 ~ 20) of concurrent multicast groups to be joined per bridge port
  • Supports IGMP snooping/proxy in v1, v2, and v3
  • Selectable IGMP proxy and IGMP snooping
  • Fast and Normal Leave modes
  • DHCP
  • DHCP Server (IP allocation to DSL users), DHCP transparent forward, and DHCP relay agent option-82 functionality (the value within Agent Circuit ID and Agent Remote ID sub-options are configurable).
  • Supports selection of DHCP forwarding modes with enabled relay option-82
  • Normal Forwarding Mode: the system follows general MAC bridging mechanism for DHCP frame forwarding.
  • Secured Forwarding Mode: the system forwards DHCP frames according to attached Option-82 tags in downstream direction, rather than the destination MAC address of each DHCP frame.
  • Able to pass through CDP (Cisco Discovery Protocol) message for both directions: between trunk ports and between DSL ports and trunk ports
  • Link Layer Discovery Protocol (LLDP) defined in IEEE 802.1ab that allows network devices to advertise and also recognize identities and capabilities within devices which are directly connected. This feature can be configured on a per port basis.

Security

  • Supports ARP anti-Spoofing and MAC anti-Spoofing
  • Supports Layer-2 frame filtering based on source/destination MAC addresses
  • Supports Layer-3 filtering based on IP header including source/destination IP address, protocol ID, and TCP/UDP destination port number
  • Supports filtering out broadcast frames (destination MAC Address 0xFFFFFFFFFFFF) in the downstream direction. When this option is activated, only protocol-specific broadcasts (DHCP, ARP) are allowed to be forwarded to downstream users.
  • Supports secured forwarding that forces upstream traffic to the specific gateway, by means of replying upstream ARP request with MAC address of default gateway
  • Supports IEEE 802.1X Authentication using RADIUS protocol on each DSL port
  • Supports the ability of RADIUS Client for management access authentication whose identifier (username and password) can be authenticated by remote RADIUS Server
  • QoS

Supports Ethernet rate limit function including:

a.       Per bridge port rate limiting
  • Profile based configuration
  • Ingress: all kinds of traffic
  • Egress: unicast traffic
  • Apply to line bridge port
b.      Per bridge port per VLAN rate limiting
  • Profile based configuration
  • Ingress: all kinds of traffic
  • Egress: unicast traffic
  • Apply to line bridge port
c.       Per bridge port broadcast traffic rate limiting
  • Profile based configuration
  • Apply to line/trunk bridge port
d.      Per VLAN rate limiting
  • Non-profile based
  • Broadcast: support rate limiting for PVIDs of trunk interfaces with an internal maximum rate 500K bps per PVID VLAN
  • Flooding: support rate limiting for all defined VLANs, trunk/line
  • Supports Three Color Marking (TCM) rate limit policer in accordance with the Metro Ethernet Forum (MEF) Bandwidth Profile and RFCs 2697 & 2698.
  • VLAN priority queue per IEEE 802.1p (4 priority queues for 8 802.1p CoS value. The mapping between 4 priority queues and 8 priority values are configurable.)
  • Selectable adopted priority queue mechanisms according to Strict Priority Queue (SPQ) and Weighted Fair Queue (WFQ)
  • Traffic classification by re-assigning CoS (p-bit) value according to CoS (802.1p priority bit), VLAN ID, ToS, DSCP, Source/Destination IP address, or Source/Destination MAC address
  • Configurable mapping between ATM PVC and 802.1p CoS for received untagged frame from subscriber port

ATM and Interworking:

  • 8 PVCs per subscriber line; VPI range is from 0 to 255 and VCI range from 32 to 65535 conforming to ATM Forum UNI 3.1/4.0, PVCs only.
  • Multi-protocol encapsulation over ATM per RFC 2684 / RFC 1483 for bridged mode, LLC encapsulation method only.
  • Supports AAL5 per ITU-T I.363.5.
  • Commits the supported ATM service categories in the increasing order of UBR, CBR on a per port basis.
  • Provide sPCR (peak cell rate) configurable parameter for CBR service.
  • Profile-based ATM traffic management (up to 16 traffic descriptors with one default and 15 user-configurable descriptors).
  • PPPoE transparent forwarding and PPPoE intermediate agent.

H36-042-30 Unmanaged Industrial PoE Switch with 4 X 30W PoE + 1 RJ45 and 1 SFP Interface

$358.00

The H36-042-30 is an Industrial Gigabit Adjustable PoE Switch that is designed with IP30, 6KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C during harsh weather conditions. They enable indoor connections of PoE PDs to the network such as outdoor IP cameras, wireless APs, and other industrial applications. The H36-042-30 provide 4-port Gigabit PoE with 1 port Gigabit adjustable 12VDC or 56VDC PoE as well as additional SFP transceiver slots for flexible uplink.

The H36-042-30 as easy-to-install power source equipment (PSE) and provide power up to 30W per port.

VX-1000HDx 48 Port ADSL2+ IP DSLAM

Multi-ADSL Speed Features

  • ADSL, ADSL2 and ADSL2+ support through the POTS/ISDN user interface

Sleek, Compact Solution

  • Provides 48 ports ADSL2/2+, only by 1.5U chassis space.
  • Built-in splitter for 48 port variety in 1.5U space.
  • Stackable for higher port density

Wide Temperature Range

  • Operating Temperature: -10°C to 65°C
  • Relativity Humidity: 5% to 95% (non-condensing) at 35°C

System Overheating Protection

  • FAN alarm indicating if FAN malfunctions
  • Temperature monitoring and system overheating trap functionality

 Single IP Management for System Cascading

  • Cluster IP management when ADSL2+ IP DSLAM cascading.
  • Cluster IP management when ADSL2+ IP DSLAM cascade with other Versa Technology DSLAM units

 Scalable Solution

The VX-1000HDX ADSL2+ IP DSLAM unit from Versa Technology features 48 ports. This gives users the ability to generate additional revenue with minimum installation time and expense.

Expanded Revenue Opportunities

The mini-DSLAM offers flexibility to service providers to deliver various services by offering a wide range of multiple DSL connectivity speeds at different prices.

Compact Design for Limited Space

The ADSL2+ IP DSLAM occupies only 1.5U of standard Telco rack space. It will easily fit in existing remote terminals.

High Reliability and Easy Maintenance

Each ADSL2+ IP DSLAM unit from Versa Technology is equipped with a fan and air filter unit. The unit features low power requirements plus full diagnostic and alarm reporting capability. The DSLAM features SNMP, CLI and Web GUI based powerful, easy-to-use features including remote access and software downloads that help service providers minimize daily operational costs.

VX-1000MDx 24 Port ADSL2+ IP DSLAM

Multi-ADSL Speed Features

  • ADSL, ADSL2 and ADSL2+ support through the POTS/ISDN user interface.

Sleek, Compact Solution

  • Provides 24 ports ADSL2/2+, only by 1.5U chassis space.
  • Built-in splitter for 24 port variety in 1.5U space.
  • Stackable for higher port density

Wide Temperature Range

  • Operating Temperature: -10°C to 65°C
  • Relativity Humidity: 5% to 95% (non-condensing) at 35°C.

System Overheating Protection

  • FAN alarm indicating if FAN malfunctions
  • Temperature monitoring and system overheating trap functionality

Single IP Management for System Cascading

  • Cluster IP management when ADSL2+ IP DSLAM cascading.
  • Cluster IP management when ADSL2+ IP DSLAM cascade with other Versa Technology DSLAM units

Scalable Solution

The VX-1000MDX ADSL2+ IP DSLAM unit from Versa Technology features 24 ports. This gives users the ability to generate additional revenue with minimum installation time and expense.

Expanded Revenue Opportunities

The mini-DSLAM offers flexibility to service providers to deliver various services by offering a wide range of multiple DSL connectivity speeds at different prices.

Compact Design for Limited Space

The ADSL2+ IP DSLAM occupies only 1.5U of standard Telco rack space. It will easily fit in existing remote terminals.

High Reliability and Easy Maintenance

Each ADSL2+ IP DSLAM unit from Versa Technology is equipped with a fan and air filter unit. The unit features low power requirements plus full diagnostic and alarm reporting capability. The DSLAM features SNMP, CLI and Web GUI based powerful, easy-to-use features including remote access and software downloads that help service providers minimize daily operational costs.

VX-160CE VDSL2 SFP Modem (Remote Telco Grade)

$119.00

Versa Technology’s VX-160CE is a Telco Grade VDSL2 SFP modem that interconnects with Gateway Processor by using a MSA (MultiSource Agreement) compliant hot pluggable electrical interface. The chipset inside the VDSL2 SFP modem supports all VDSL2 profiles that are defined by ITU-T G.993.2, G.994.1, G.997.1 and among other standards, ensures its interoperability with all existing broadband network services. Furthermore, Versa’s VX-160CE also features the latest ITU standards such as G.inp (G.998.4) and G.vector (G.993.5).

As broadband access technology has evolved rapidly, Service Providers need to upgrade their broadband network service every few years. Traditionally, Service Providers have replaced the entire CPE device in order to provide subscribers with faster Internet services. Not only does it increase their CAPEX and OPEX but also wastes resources and increase inventories. Leveraging the VX-160CE VDSL2 SFP in Service Providers’ product portfolio will help them significantly reduce the software porting and testing effort and shorten their product time-to-market.

Versa’s VX-160CE VDSL2 SFP modem realizes the modulation of VDSL2 broadband access. It can be integrated with routers, switches or residential gateways that are equipped with a SFP type of WAN interface. There’s no need for Service Providers to maintain more than one type of CPE device in the field or in the warehouse, moreover, this also can give them the possibility to future upgrade. Users can upgrade to any broadband access data rate easily only by plugging in different types of WAN SFPs such as VDSL2 35b/G.fast or optical TRx SFPs with the same internet box and user interface.

  • Supports all VDSL2 standards defined in ITU –T G.993.2, G.994.1, G.997.1
  • MSA compliant hot pluggable electrical interface
  • Supports G.inp (G.998.4) and G.vector (G.993.5)

VR-3030 VDSL2 Router / Modem (17a)

The VR-3030 Multi-DSL Router provides wired access for high-bandwidth applications in the home or office. The unit includes one Fast Ethernet port and supports ADSL2/2+ and VDSL2 connections with automatic fallback to ADSL2/2+. The VR-3030 supports routed or bridged mode and when operating under Profile 17a in VDSL2 mode can achieve up to100Mbps of downstream high-speed bandwidth. With the exclusion of wireless access, support and installation is simple and straightforward.

VX-200M-2222-20 Industrial Micro 10/100Base-TX to 100Base-FX Ethernet Single Mode Media Converter

$99.00

VX-200M-2222-20 is a micro media converter that supports single mode two SC type Fiber and meets EN55022. It is an industrial product whose operating temperature range is -10°C to 60°C. The Ethernet port supports both half-duplex and full-duplex mode. VX-200M-2222-20 is the same at the transmitter or receiver sides. The sleek design of the micro media converter occupies limited space and it’s an ideal solution for easy installation within most camera housings.

VX-200M-X3 Industrial Micro 1000Base-T to 1000Base SFP Ethernet Media Converter

$129.00

VX-200M-X3 is a micro media converter that supports external SFP modules and meets EN55022. It is an industrial product whose operating temperature range is -10°C to 60°C. VX-200M-X3 supports 1000M Ethernet port and 1000M SFP port. The Ethernet port supports both half-duplex and full-duplex mode. VX-200M-X3 is the same at the transmitter or receiver sides. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed. The sleek design of the micro media converter occupies limited space and it’s an ideal solution for easy installation within most camera housings.

VX-200MT-X2 Hardened Micro 100Base-T to 100Base SFP Ethernet Media Converter

$119.00

VX-200MT-X2 is a micro media converter that supports external SFP modules and meets EN55022. It is an industrial product whose operating temperature range is -40°C to 75°C. VX-200MT-X2 supports 100M Ethernet port and 100M SFP port. The Ethernet port supports both half-duplex and full-duplex mode. VX-200MT-X2 is the same at the transmitter or receiver sides. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed. The sleek design of the micro media converter occupies limited space and it’s an ideal solution for easy installation within most camera housings.

VX-200MT-X3 Hardened Micro 1000Base-T to 1000Base SFP Ethernet Media Converter

$159.00

VX-200MT-X3 is a micro media converter that supports external SFP modules and meets EN55022. It is an industrial product whose operating temperature range is -40°C to 75°C. VX-200MT-X3 supports 1000M Ethernet port and 1000M SFP port. The Ethernet port supports both half-duplex and full-duplex mode. VX-200MT-X3 is the same at the transmitter or receiver sides. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed. The sleek design of the micro media converter occupies limited space and it’s an ideal solution for easy installation within most camera housings.

VX-R10 Micro Media Converter 19” 1U Rack (10 Slots)

$139.00

The VX-R10 Rack is designed for all Versa Technology micro media converters. The 19” (483mm) 1U-high (44.5mm) rack conveniently houses and supplies power to all micro units. This rack option offers easy installation and instant viewing of all micro media converters LED indicators. The centralized power supply simplifies installation, saves space and clears control rooms.

The rack includes a 12VDC power supply and supports a maximum of 10 micro media converter units. The rack features “hot swappable” capabilities, allowing any micro media converter unit to be removed and restored without affecting the operation of the other units in the rack.

 

VX-7900i Indoor Mini-CMTS Head End

$4,499.00

Versa Technology’s VX-7900i CMTS allows operators to transmit data at fiber speeds using DOCSIS 3.0 and C-DOCSIS protocols in HFC networks.

The VX-7900i uses channel bonding technology to optimize data speed transmission rates using legacy COAX lines. The VX-7900i can utilize up to 16-QAM channels to achieve downstream (DS) data rates of up to 1.1Gbps; and utilize up to 4 QPSK/QAM channels to achieve upstream data rates of up to 160MBPS.

The unit’s downstream can be configured to data channels or IP QAM channels. The unit features 1 RJ45 GE port and 1 SFP GE optical port. With layer 3 routing functions and perfect QoS, the unit can operate in a variety of working conditions and under different vendor requirements.

The VX-8900i features a compact form factor measuring 19 inches 1U making it ideal for small scaled networks.

The unit supports compatibility with DOCSIS 3.0 / 2.0 cable modems.

 

VX-Pi100 PoE Injector

$21.00

Versa Technology offers the VX-Pi100 802.3af Power over Ethernet (PoE) Injector that operates with all access points that are 802.3af PoE Compatible. The VX-Pi100 is self-contained with both a Power over Ethernet PoE Injector Adapter and a power supply. The VX-Pi100 also has 100/240VAC support and supplies 48VDC to all units for PoE. The VX-PI100 PoE injector supports up to 48 volts and .5 Amps for a total of 24 Watts. This PoE Injector can be used with VoIP Phones, IP Cameras, Access Points, Media Devices and many other PoE Compliant devices.

The Versa Technology VX-Pi100 Poe Injector Adapter injects power over pairs 4, 5, 7 and 8. This unit can be used with all Cisco 802.3af POE Compatible devices, including Cisco IP Phones and Cisco Wireless Access Points. This Midspan POE Injector also provides Auto Recovery and Short Circuit prevention from over-voltage.

The VX-Pi100x Series Power over Ethernet (PoE) Midspan product category offers an affordable and fully IEEE 802.3af compatible solution that allows for the upgrading of existing solutions using PoE.

Midspan Power over Ethernet Injector VX-Pi100x Series allows IP telephones, wireless LAN access points, security network cameras and IP terminals to receive power and data over standard Ethernet cables, leaving a network infrastructure completely unaltered.

PoE simultaneously relays data and power smoothly and securely over a single LAN cable with no interference. A PoE injector resides between the Ethernet switch and the data terminals and delivers data and power from switches to powered devices. It is a highly effective means to inject power into existing LAN cables. VX-Pi100x series POE Power Supplies are fully compatible with the IEEE 802.3af PoE definition standard and provides a minimum of 15.4 Watts of power through each port to ensure safe operation of any standard PoE data terminal.

Our most popular power over Ethernet injector networking device is now available with bulk pricing. Order 20 or more to receive steep discounts.

Features:

  • 10/100Mbps
  • Cat5/Cat6
  • 24 Watts
  • Cispr 22’B’, Vcci’B’, Fcc’B’ Compliance
  • Light Weight: 145g
  • Efficiency Over 75%
  • Over-Voltage Protective Installation
  • Short-circuit Protective Installation
  • Protection Type: Auto-Recover
  • Operating Temperature -10°~50°C
  • UL and C-Tick Certified

VX-Pi148G Gigabit Power Over Ethernet Passive Injector

$12.00

The VX-Pi148G from Versa Technology is a dependable Power Over Ethernet Passive Injector. The unit is IEEE 802.3af compatible and supplies 48VDC powerover Ethernet cables. The VX-Pi148G IEEE 802.3af Power Over Ethernet Injector sends DC Voltage through a Cat.5 cable and allows the cable connected to the injector (VX-Pi148G) and the device to simultaneously transfer at the same time. The maximum distance between the injector (VX-Pi148G) and the end device is 100 meters. The VX-Pi148G Power Over Ethernet Passive Injector sends power over pairs 4, 5 and 7, 8. Data Pins are 1, 2 and 3, 6.

Specifications:

  • 24 Watts
  • Light Weight
  • Dimensions: 74 x 54 x 25mm
  • 802.3af compatible
  • DC jack Pin size: 2.1 mm (0.083 in)
Loading

Have a question? Need help with a custom order? Want to talk to an engineer about your project? CALL NOW or GET HELP

Shopping cart